ATJ2085H ZicPlay Minikey Colour 1Gb w/fm- firmware?
 

I need a good full firmware for ZicPlay 1Gb Minikey Colour w/fm.

Chip: ATJ2085H
Mainboard: ET-U225PQ DRM10V4.0

I connected it to computer and it has died. When I tried to switch on, only LCD backlight and that is all.

I have changed firmware for a wrong and sometimes I have got only as a disk and sometimes only LCD backlight.

What should I do??
Which firmware I have to insert into the player?

Help me, please...

wojtas7650 , there is no way to identify which exact firmware you'll have to use in order to fully recover your player. From your processor chip ATJ2085, it points to either the v3.5.35 or v3.5.37 firmwares.

v3.5.35 http://www.mympxplayer.org/actions-3535-dc15.html
v3.5.37 http://www.mympxplayer.org/actions-3537-dc16.html

It is a trial & error method, so you'll need to try all the firmwares for your screen size until you get a fully working one. Good luck!

but should I try mp4 firmwares too??

My player have only OLED LCD.

wojtas7650 , what type of player do you have? A picture of it would be good.

Re: ATJ2085H ZicPlay Minikey Colour 1Gb w/fm- firmware?
 

Ok.

My player is standard mp3 player on chip ATJ2085H with OLED.

That is a picture:

http://fix-gsm.ovh.org/zic.jpg

wojtas7650 , you would find more suitable firmwares for your type of player at the S1mp3 site here http://www.s1mp3.org/en/downloads_fw.php

wojtas7650, I have one zicplay like yours too and i need to flash it (i had some problems with it) did you had any luck finding the right file? can you tell me the right file to download? thanks in advance

i have not found any flash which is full compatible with our players.

If you can dump your flash and send it to me please.

mail wojtas7650@o2.pl