FW 9.0.50

melme1 · #1 (**permalink**) 16th Sep 2007, 1:11 am

ACT209X_S75_SZG fw 9.0.50

can someone send me a full version firmware of 9.0.50 ACT209X_S75_SZG?please

lattesurf · #2 (**permalink**) 16th Sep 2007, 1:29 am

melme1 , are you still having the problem of installing ADFU from your previous thread here? http://www.mympxplayer.org/blue-scre...r-vp36637.html

If not, and you have successfully installed ADFU, then you'll need to try all the v9.xx firmwares here http://www.mympxplayer.org/actions-9...ware-dc37.html

melme1 · #3 (**permalink**) 16th Sep 2007, 1:35 am

lattersurf can u give me the link for the correct firmware of my mp4 player its an clone ipod nano 2nd generation with a 1'8 LCD ACT209X_S75_SZG fw 9.0.50 please?

lattesurf · #4 (**permalink**) 16th Sep 2007, 1:39 am

melme1 , there is no way of telling which firmware would work exactly with your player. The firmware versions merely indicate which group of firmwares it belongs to. The manufacturers do not practice proper versions control, so even another firmware had the same firmware version as yours, it might not work at all.

Besides, the v9.xx firmwares are not supported by the extraction tool, so other users with working players are unable to extract their firmware for you to try. There are a handful of firmwares that you can try in the downloads section, and the best way to recover your player is to try them 1 by 1.

melme1 · #5 (**permalink**) 16th Sep 2007, 1:54 am

i can't just try each firmware, because the some chipsets are not flexible.

according to wikipedia

The firmware used in various S1 MP3 players differs significantly, but this is not widely understood. Problems have arisen as consumers have attempted to upgrade their players using incompatible firmware with a higher version number. This can permanently damage the players.

from s1mp3.org

Those firmwares are to be used ONLY for developers and people wishing to recover their _dead_ players. You have a 99% of chance to kill you player if you flash it without checking the Board ID! i.e., make it inoperable INSTANTLY, probably BEYOND REPAIR. (See Board ID: device real identification)
If you got a dead device, please check the Dead recovery guide

i just need a firmware for this ACT209X_S75_SZG type.

lattesurf · #6 (**permalink**) 16th Sep 2007, 2:09 am

melme1 , the only way to recover a player is to try each and every firmware one by one.

Like i mentioned, this version is currently Not supported by the firmware extraction tool, so nobody could successfully extract it. Chances of you finding a firmware with the exact version number and fully compatible with your player is extremely low.

gemelo71 · #7 (**permalink**) 16th Sep 2007, 7:58 am

man you have to look around seccion downloads, there is a FW same like you want it, this is the link:

http://mympxplayer.org/act209xs75szg...-pm-df651.html

i hope you can recover your mp4