Need Firmware for chip Samsung ATJ2091N

lsizquierdo · #1 (**permalink**) 18th Sep 2007, 10:11 am

I have my MP3 player dead, because overwrite his original firmware.
Only I have the chip model and the code of the board:

Is a MP3(DVR)
Capacity 2GB, no FM.

Chip Samsung: ATJ2091N
Board serial: SCC91-001 MAIN v0.2
2006.09.19

I don't know what FW I can use. I hope answers, and sorry for my bad english..!

lattesurf · #2 (**permalink**) 18th Sep 2007, 6:39 pm

lsizquierdo , your player would be using the v9.xx firmwares here http://www.mympxplayer.org/actions-9...ware-dc37.html

As there is no way to tell which firmware would work with your player, you'll need to try all of them until you get one working.

lsizquierdo · #3 (**permalink**) 18th Sep 2007, 9:05 pm

It's that I thing but my player perhaps use a chip ATJ2091N without FM and a Memory Sansung of 2GB, is only a MP3 player whit a monochrome display with backlight of 7 colours, is a generic player, and the 9.x.x.x FW series almost all were made for MP4 players.
I need the firmware that can handle this chip but it adjust to this display..!

lattesurf · #4 (**permalink**) 18th Sep 2007, 9:13 pm

lsizquierdo , in this case, you'll find more suitable firmwares for your type of player at the S1mp3 forum here http://www.s1mp3.org/en/downloads_fw.php

But however, it seems that the list are mainly the v3.xx firmwares. Not very sure if they have updated their list to include the v9.xx firmwares.

lolita · #5 (**permalink**) 19th Sep 2007, 3:18 am

Quote:

1. 128*32 black and white screen solution
2. Wire control buttons
3. Power supply: AAA dry battery
4. Audio format supported: MP3/ WMA/ WMV/ ASF/OGG/ WAV / ACT. (APE
not supported)
5. DRM supported, needs plug-in RTC- HT1381
6. EQ supported: Normal/Rock/ Pop/ Classic/ Soft/Jazz/ DBB
7. SRS: supported
8. Video: not supported
9. DC: not supported
10. Recording format: MP3/WAV/ ACT
11. Recording source: MIC/FM IN
12. FM: supported
13. Picture: not supported
14. E-book: not supported
15. Program space: 5M Bytes
16. Flash: new architecture flash driver, 4G Bytes supported
17. Card: not supported
18. Directory level: 8 level
sub-directory supported
19. File number: supports 999 files at most in single directory

This official Actions solution for 2091N IC. If you want the official firmware I request.