sorry for taking so long i wiped my comp just to make shure no other driver was installed,when i connect to my comp says unkown device so i tried updating the driver and make shure its in the rockusb folder but it says it carnt find a better match than whas alreaady installed

Then you have to deliberately remove the driver it's using. Go into Device Manager while the player is connected and under the USB section you should see the Rockchip device listed. Right click on it and choose remove, then unplug the player and then re-connect it in the way you did before (power switch off, holding the button) It will then find the unknown device and you should then be able to install the proper driver. It's helpful to have the updater program running and loaded with the correct firmware so that when the driver is successfully loaded you can click 'update' and immediately update the firmware. One thing I forgot to say is that once its successfully updated, SAFELY remove it and then power it on, that's when the actual update takes place, BUT you must have a charged battery or be hooked up to AC, so after the update is done and you unplug the player, plug it into and ac adapter before you turn it on. After you turn it on, just wait, it will update by itself (not connected to the computer, so don't mess with it until its done.

ok gone in to device manager and its litsed as a unkown device i i lcicked on update driver i choosed install my own driver and it says the wizard could not find a better match for your hardware than the ssoftware you currently have installed,and i had the firmware updater on wile i was doing it

Re: big mistake flashing onda 858le any possible help
 

when i go in to device manger and click on the unkown device it says no drivers installed

player is now fully fixed,justed opend the back up lifted the battery and used the twser trick on the chip and nows its fully working again thx you every one

Ha, I was afraid it would come to that, but I didn't want to say anything until it was absolutely necessary because it didn't sound like you could handle it, but apparently I was wrong. I fixed one of my players that way too.

Just out of curiosity, when you 'chipped' it, did the updater program recognize it without having to load the RockUSB driver?

Anyway, glad you got it back. See how easy it is???

no it came up rockusb detected then i installed the drivers,i was about to give up on it and keep it for parts when i was doing the twezer trick it went in to usb storage mode again so i gave it one last chance then it worked,took me all of 3mins max

i think it was more luck on myside than skill

Me too. I sat with a dead player for a couple of weeks (an RM100). No matter what pins I shorted it didn't seem like it would go into upgrade mode. I'm surprised I didn't fry something with all the shorting I was doing, but one day I must have hit it just right and the screen went from black to white, I installed the driver, and got my player back.

Anyway, you've paid your dues, good job!

thx m8 now i just need to find out how to put movies on the frigging thing lol,says it play avi but nothing seems to work,and thank you for all your time and help