big mistake flashing onda 858le any possible help
 

just got a onda vx858le and i have tried flashing it with the vx858 (big mistake)my own falt for rushing in to it i didnt know there was 2 models of this.now it still on but the screen controlles dont work and my pc dont see the drive.now would it be possible to find the drivers for the vx858?so i could flash it back.
many thanks to every one

just an update i can get my pc to see the drive by plugging in the usb and pressing the reset button,but the firmware updater dont see a rock device

What kind of drive does it see? You have to get it to see the upgrade partitiion, not the regular data partition. If you're using Windows, look in Device Manager. What kind of drive is it listed as?

Also, what version of the updater are you running?

Re: big mistake flashing onda 858le any possible help
 

when its just pluged in to usb its says unkown device but when i reset it it says usb mass storage device and im using the firmware updater that came with it its 2.8.1

The way to get a Rockchip player into upgrade mode without the menu is to turn the switch off and hold a button down while plugging it into the computer. It's usually the play button, but a bad firmware can change that so it could be any button, just continue to hold it while you plug it into the computer, if it's not recognized then try a different button, then when it's recognized you can let go of the button and see if the upgrade software recognizes it. If it doesn't, you may have to load the right drivers for that upgrade software. The right drivers should be in the upgrade programs folder. The way to upgrade the driver is to go into Device Manager and delete the driver that's being used, then windows will detect it and ask to find a driver, point it to the one in the upgrade programs folder and it should then be able to upgrade.

Re: big mistake flashing onda 858le any possible help
 

Are you just plugging it in or are you powering it off and holding a button down when you plug it in? You have to do the latter to get into upgrade mode. If it says unknown device, don't reset it! You DON'T want mass storage mode. When it says unknown device, follow the driver loading process, but don't let it pick a driver, lead it to the one in the upgrade program folder. If it doesn't have one download the latest upgrade program from this site, it has it. Once that driver is loaded the upgrade program will recognize it and you'll be able to update it, hopefully with the right software.

Re: big mistake flashing onda 858le any possible help
 

ok i have been turning it off and holding the buttons down but seem to be doing any thing,where can i get the program folder from please could you point me the right way and thank u for all your help

Re: big mistake flashing onda 858le any possible help
 

No problem. Follow these directions carefully. Don't be in a hurry.
1. The player has to be off
2. you have to hold, and keep holding, one of the buttons
3. While still holding the button, plug it into the computer
4. Wait about ten seconds for it to be detected (while still holding the button).
5 if it's not detected, unplug it and try the same process with a different button.

The latest consumer update software is in the downloads section of this site, under 'tools', it's the fifth one down. put it in a conspicuous folder and unzip it, then you'll have to install it, but before you can install it you'll have to uninstall the old version. Do that through windows control panel.

the player dont fully turn off,when i turn it off the battery icon starts going up and down like its charging even tho nothing is pluged in

Does it have an actual on/off switch? If it does, turn it to the off position then hit the reset hole, then it should be off.