Dead iPod nano clone

ziociccio · #1 (**permalink**) 20th Oct 2007, 1:06 am

hi.
i'm italian man (sorry for my english),and i have a problem.
i have this ipod nano clone :
http://hackedgadgets.com/2006/12/22/ipod-nano-clone/

yesterday,i flashed it with a firmware that i have found in your forum.
now,my mp3 reader is out of order,it's display is dead,and flashing every 10 secondos.

what can i do?
my computer do not recognize it.

lattesurf · #2 (**permalink**) 20th Oct 2007, 9:47 pm

ziociccio , you would have bricked your player by flashing an incompatible firmware.

Do you still remember your previous working firmware version?

Does MP3 Utilities Upgrade Tool still recognise your player?

ziociccio · #3 (**permalink**) 21st Oct 2007, 12:22 am

Quote:

Originally Posted by lattesurf";p=&quot

ziociccio , you would have bricked your player by flashing an incompatible firmware.

Do you still remember your previous working firmware version?

Does MP3 Utilities Upgrade Tool still recognise your player?

no.
my computer do not recognize my player,mp3 utilities upgrade tools too.

lattesurf · #4 (**permalink**) 21st Oct 2007, 12:37 am

ziociccio , in this case, then you'll need to follow the Dead Player Recovery guide here http://www.mympxplayer.org/dead-play...ide-vt567.html

After you have opened the player's casing, identify the processor's serial number (eg ATJ2085, ATJ2097, etc).

interuptor0 · #5 (**permalink**) 26th Oct 2007, 6:16 am

open ur player's cover. look for the flash chip(34pins). short circuit pin 29 and 30. hold it and connect USB cable. after hearing connect sound from ur PC, release the short circuit. but in first thing to do, u must get ur correct firmware and upgrade software ready.