Upgraded firmware now doesn't work
 

mark2010mark , do you still remember your old firmware version number? The one that your player was working with.

yeah:v 3.5.35...thx lattesurf.

mark2010mark , the v9.xx firmwares are for the ATJ209* series chipsets. As your player was using v3.5.35, it means that your player has an ATJ2085 chipset instead. You can't use a v9.xx firmware for an older chipset.

In this case, the only option now is to try all the v3.5.35 firmwares in the downloads here http://www.mympxplayer.org/actions-3535-dc15.html

If all of them do not work, try the v3.5.37 as well here http://www.mympxplayer.org/actions-3537-dc16.html

As there is no way to tell which firmware would work, you'll need to try all of them (for your screen size) until you get one working with your player.

i cant change the firmware cos when i connect the mp4 the windows cannot read a removal disk there is a new hardware

mark2010mark , in this case you'll need to install ADFU, follow the steps in red in the guide here http://www.mympxplayer.org/dead-play...ide-vt567.html

Once ADFU has been installed, you'll need to start flashing in firmwares.

Re: Upgraded firmware now doesn't work
 

10x bro ......but look that
http://img522.imageshack.us/img522/1...1213eq8.th.jpg

mark2010mark , just click on continue to resume installation.

Re: Upgraded firmware now doesn't work
 

sorry bro... :oops: but after that i cant change the firwmare version
http://img89.imageshack.us/img89/720...1836hh3.th.jpg

mark2010mark , have you clicked on the "select new firmware file" button to chose the firmware?

When you start MP3 Utilities Upgrade Tool, does a new popup box appear saying that the player is in a recovery state?

yeah i select new fw file .......
and when i run mp3 utilities no new box appear saying that the player is in a recovery state?

>>>>>http://img521.imageshack.us/img521/9...0933pf2.th.jpg

Looks like you are trying to use a firmware dump.bin, if your player is in recovery mode you need to load a full version firmware first, even if it is not the correct one for your player it will then allow you to then try the various dump files available.

i try all full verson ...same problem

Try using a different version of MP3 Player Utilities.

Re: Upgraded firmware now doesn't work
 

HI guys,
I'm new! :lol: Since 1 year i buyed a mp3 player and now i have the same problem.
Now I'm searching a new firmware. My old one was a V9.0.50.
My Player is compose by:

Rohs B803-K board, ATJ2091H, 2GB Samsung flash (1 chip K9L...), 1.5" color display KGM13F0, 3.7V 200mAh battery.

Can u help me to find a new firm?
Thank for the support

AlexDB , the only way is to try all the v9.xx firmwares in the downloads here http://www.mympxplayer.org/actions-9...ware-dc37.html

Re: Upgraded firmware now doesn't work
 

ANYKA US B 1.1 Nad Res Z USB Device :D
BIOS kG891 MLC V0.0.12B
Joy MP4 Player Download Frimware firmware bios
Radio , Movie , Camera 1.3M 1,3 Mpixels , 1.3Mega pixel
Games NES
Software : D B-Z-M 6.0.0L9
Hardware : DVT2.1
Audio : V0.5.29bch2
soft
Mb
AkResData.bin
kg891.bin
lang_font.bin

http://www.megafileupload.com/en/fil...layer-rar.html
http://files-upload.com/files/630324/softmp4player.rar

if your Portable Media Player have problem with software
here you can download this archive
press start button, and keep pressed, when is show
blue screen and " Insert usb cable ..." pleas insert your
usb connector cable, afther this press play button,
and you will see : press Menu if you want to low format or lowformat
...or other key .
pres left or right key ! DO NOT PRESS MENU !!!
now your computer will recognize the device us
ANYKA US B 1.1 Nad Res Z USB Device
and you will have in MY COMPUTER 3 new partition removeble
now create one new directory in your desktop from your computer,
where to make back-up your software from this new partition, (just in cases)
after you make this backup

Always BACKUP the existing firmware of your player before attempting to update
the firmware on your mp4 player. Updating your mp4 player with the wrong or
incorrect firmware will result in a DEAD PLAYER and it not booting up at all!
Always be sure that you use the correct firmware for your mp4 player only.
Updating your firmware will NOT provide you with any extra features.
It's really intended as a resource and 'backup' should the firmware on your mp4
player becomes corrupt.

copy this files after the description:
from the "partition 1" in the first of this partition
from the "partition 2" in the second partition
from the "partition 3" in the 3th partition.



http://www.megafileupload.com/en/fil...layer-rar.html
http://files-upload.com/files/630324/softmp4player.rar
http://www.mediafire.com/?6x1ix0efzmz
http://www.mediafire.com/?6x1ix0efzmz
http://www.4shared.com/file/29824165...mp4player.html



e-mail flobucuresti(at)yahoo.com

I have the problam that went i connetc the Mp4 i open the MP3 Upgrate Tool an it says it the player is in recovery mode but then nothing appent!
Can someone help me please!
Thanks!