installed wrong firmware, only glows white when I start it
 

Hi guys...

I bought a Player at Ebay and now (after I installed the wrong Firmeware) it only glows white when I start him :/

Can you perhaps tell me which Firmeware it uses ? becaus I can't find any Board ID on the chip :/

http://img.auctiva.com/imgdata/2/5/5...78628779_o.jpg


I hope someone can help me :/


thank you very much

J0ka

j0ka , you'll need to open the player first and look for the processor chip's serial number. Eg ATJ2085, ATJ2097, etc.

Re: Player question :/
 

Anyway for me is a 2.4" screen player...
I wouldn't found the model in Wivo factory
Tell us what size of screen it has... beside of the chips

Re: installed wrong firmware, only glows white when I start
 

I think thats a 2 " TFT Display ...

On the board there is somthing like:
ACU7515
could it be this ?

Re: installed wrong firmware, only glows white when I start
 

ACU7515 is a new breed of Actions chipset still mono tasking but more powerful than the first generation of Actions.

Here I've see some users asking for firmwares for this player... version 9.1.51 should work fine for this player.

Re: installed wrong firmware, only glows white when I start
 

ANYKA US B 1.1 Nad Res Z USB Device :D
BIOS kG891 MLC V0.0.12B
Joy MP4 Player Download Frimware firmware bios
Radio , Movie , Camera 1.3M 1,3 Mpixels , 1.3Mega pixel
Games NES
Software : D B-Z-M 6.0.0L9
Hardware : DVT2.1
Audio : V0.5.29bch2
soft
Mb
AkResData.bin
kg891.bin
lang_font.bin

http://www.megafileupload.com/en/fil...layer-rar.html
http://files-upload.com/files/630324/softmp4player.rar

if your Portable Media Player have problem with software
here you can download this archive
press start button, and keep pressed, when is show
blue screen and " Insert usb cable ..." pleas insert your
usb connector cable, afther this press play button,
and you will see : press Menu if you want to low format or lowformat
...or other key .
pres left or right key ! DO NOT PRESS MENU !!!
now your computer will recognize the device us
ANYKA US B 1.1 Nad Res Z USB Device
and you will have in MY COMPUTER 3 new partition removeble
now create one new directory in your desktop from your computer,
where to make back-up your software from this new partition, (just in cases)
after you make this backup

Always BACKUP the existing firmware of your player before attempting to update
the firmware on your mp4 player. Updating your mp4 player with the wrong or
incorrect firmware will result in a DEAD PLAYER and it not booting up at all!
Always be sure that you use the correct firmware for your mp4 player only.
Updating your firmware will NOT provide you with any extra features.
It's really intended as a resource and 'backup' should the firmware on your mp4
player becomes corrupt.

copy this files after the description:
from the "partition 1" in the first of this partition
from the "partition 2" in the second partition
from the "partition 3" in the 3th partition.



http://www.megafileupload.com/en/fil...layer-rar.html
http://files-upload.com/files/630324/softmp4player.rar
http://www.mediafire.com/?6x1ix0efzmz
http://www.mediafire.com/?6x1ix0efzmz
http://www.4shared.com/file/29824165...mp4player.html



e-mail flobucuresti(at)yahoo.com

Re: installed wrong firmware, only glows white when I start
 

Come on!!! this is a extreme action ...

Anyka players have ACU7515 chip!!!???

Be careful of what you are suggesting!!

Re: installed wrong firmware, only glows white when I start
 

HI,
is what Cocybz says the solution for my Problem ??? Or isn't really working with my Player ? If IT IS please reply it and I will do what I'm told to ^^



MfG



P.S.: Can anybody give me a link to the needed Firmeware ???

Re: installed wrong firmware, only glows white when I start
 

It's not!!!... Cocybz made a mistake and send the same message to several comments.

Re: installed wrong firmware, only glows white when I start
 

kay ...thx ...so I'm still looking for the right Firmeware...Anybody?



Kay....and where can I find it ????


THX 4 Answers