Re: Sigmatel recovery guide (Updated)
 

Hey

I got this Lavod LFA 232

Sigmatel Chipset 3502
Hynix HY27UF082G2M

would like to make it possible to use mp3 player functions again.

Right now im stuck with rediculious usb memory stick function only.

It got stuck when using mp3 filetransfer on Windows Vista.



Tried files here allready I need the firmware or another working one! of this player again.
If you have one working let me know...

thnx.

Re: Sigmatel recovery guide (Updated)
 

Hi Th3_uN1Qu3!
I have a Tangent Jukebox 256MB MP3 Player, LIKE THIS.
Based on Sigmatel STMP 3502 L100E-CA6 chip with board nr. 500SF V1.9
I am not able to switch it on, but when i connect it to USB port, Win finds it as Sigmatel MSCN USB Device. On the players display appears the FW version: 2.600.100
It appears also in My Computer as Removable Disk, but i'm unable to access it, gives some I/O error.
Could You please guide me what to do, and provide some firmware.
Thank You, regards.

Re: Sigmatel recovery guide (Updated)
 

I have found a Fw with version 2.600.100
I did the upgrade, windows recognized as mass storage device, but now nothing appears on LCD, nor I cant switch it on.
I found another similar fw version 2. 611.101, but after update my player almost died completely. I was not able to put in recovery mode anymore, no matter how long i kept pressed the play button, nothing.
I was absolutely sure, that it was completely dead. In my desperation i've tried everithing, and with a huge luck, dont know how tho, i've started the FW download tool, and while it was searching for a device, i made the recovery procedure, and it came back alive again. I uploaded again the 2.600.100 fw, and works as a mass storage device.
I still need some help please, if somebody has a similar player, or knows some link.
Which of the files are for the play mode? Coz i dont want to mess anymore with the other ones.
Thanx!

Even though the firmware is modular, i could never get files from different firmware packages to work together.

If you have tried all firmware posted above or in the site's download section and none works, i'm afraid you're out of luck.

I've had a Meizu M6SL for almost an year and love it. I've given my Sigmatel player to my mom, and she only uses it as a voice recorder. It's been a while since i last played with it, and i remember spending a lot of time searching while i was messing around - firmware for those players is very hard to find, and in the end it's not really worth it.

I'm sorry i can't help you more.

Re: Sigmatel recovery guide (Updated)
 

Hello Th3_uN1Qu3,
I have a Logik oiii 2Gb Mp4 player recognized as sigmatel 3660. Using firmware extractor i have extracted 4 files from a working player.
I've tried all your programs(stupdaterapp.exe) but the only one that worked was maxfield g-flash. It recognize the mp4 in recovery mode, but it needs 6 files and I have only 4. Can you help me.
best regards

Re: Sigmatel recovery guide (Updated)
 

Problem solved! :D
http://www.mediafire.com/imgbnc.php/...c838c2195g.jpg
You can download the working fw from HERE!

Thank's a lot =) I have a MP-FUB35 2Gb mp3 player. Suddenly it said somethin' like "please, make backup of data and format me". When i connected it into PC it appears as SigmaTel USB mass storage, but didn't open, says that it has I/O error. F@cked a lot with it with many firmware updater applications and FW itself. When tried "For newer firmware (that contains hostlink.sb):" method it became alive =) Thans very much indeed =)

I have a sigmatel mp3 player ( Giga Rok )
Problem : no power on,black screen

i need firmware please

sigmatel 3502
1 GB
memory : hynix

Re: Sigmatel recovery guide (Updated)
 

I have MATSUI MAT 110 MR, sigmatel STMP3500/ASBR3304. When I try to flash firmware using stupdaterapp.exe it stops and informs - UPDATE VERIFICATON FAILED.

<img>

Try this firmware, it should work for Matsui 110 MR.
http://rs211.rapidshare.com/files/47...R_firmware.zip

i have
INVION MP3

MP3-FMT01-IEU
and i need firmware... please help me..

Re: Sigmatel recovery guide (Updated)
 

hi there, I have below device,

Brand : HCT
Model : EM700H
Board : Sigmatel stmp3520
Chip : Samsung 516
Unit Dimension :2.51 x 1.06 x 0.62"
Details : Multi-Codec MP3/WMA/ASF/WAV Flash Memory Player w/ FM Tuner(512MB)

Tried using Chiros_Sigmatel_MSCN_STMP3500_MP3_Player and Sigmatel_Updater_1.548 but nothing happens, currently comp. is showing as removable device.

Tks in adv.

Could you also post a picture of your player and tell us the screen size?

That looks like a newer chipset, i'll try to find some info.

Re: Sigmatel recovery guide (Updated)
 

here it is

http://img360.imageshack.us/img360/3...700hmj2.th.jpg

screec size : appx 1.25 L x 0.75 H

i need this firmware SIGMATEL STMP3504 LAE-TB6 A04374, but firstly i must reset this mp4 player how can i do this??????

i have a WELL mp4 2 gb player that i just bought today... i installed the driver from the cd but after trying to copy a movie file onto it, it gave me a error and i can't turn it on since... even the computer can't recongnize it. It comes back sometimes but only when I keep the on button pressed for 10-15 sec and even then for only 2-3 seconds...can someone help me please? 10x

Re: Sigmatel recovery guide (Updated)
 

Hello!
I have a problem with my MP3 Player :/ It´s an Avant MP500 with 1024 mb memory, based on a Sigmatel 3502 L100 - CA4 U01142 0540 Chip. The NAND chip used is a Samsung 540 K9W8G08U1M PCB0, the board number is something like JT308MAINV1.9 2005.07.09. It is working... at least something like that. The firmware died a few days ago and I had to replace it with a firmware designed for a similar device. The Player is detected as such and able to play music, but the display just contiously lights up blue and the buttons don´t work as they should (e.g. the button "forward" lowers the volume, "louder" changes the EQ-settings and the "stop" button switches to the next song... rest doesn´t work at all).
To cut a long story short, I need working firmware!

Best regards

Re: Sigmatel recovery guide (Updated)
 

Hi Guys,
I have a pb with my Samsung Z5
It can't be recognised on my PC , so I have tried in UMS mode with no succes and finally by disconnect the battery and hold the button in the middle of the pad when connecting it , at this time it is seen like a stmp3600 device .
When I try software to dialog with the player in this recovery mode, software given by the updated guide (chiros sigmatel mscn stmp 3500) I have a message that indicate that the device is detected but immediately there is an error message "unable to write firmware data" .I think this is because I don't have the right firmware for my player .
So where can I find these files ?

Thanks for all

Have you tried this firmware:-
http://downloadcenter.samsung.com/co...pdate_2_47.zip

It's version 2.47, afaik you just copy it over to the player and restart.

dead Z5
 

How can I copy this in my player ?
It-is not recognised as a player, Ineed to enter in recovery mode but all the sigmatel Prog use 4 or 6 files of "firm"
This firm is only one file
So I don't understand what I can do

Aww damn mine might be screwed, it's a Mach Speed Onyx 4 GB, I think one of the firmware updates may have gotten interrupted, and I got the transfer screen to work (the charging battery and the computer displaying FS and connection to device saying ready) but whenever I try to boot the player not connected to USB it just shows a white screen. Hopefully this method works or I bricked my mp3 player and have to buy a new one. :cry:

Consecutive updates don't seem to do anything, and I don't know if the methods mentioned in this thread will even work or not.

On mine it just shows a white screen now and is only 1.85 GB as seen by windows.
I think its in recovery mode but I'm not sure, I just wish that small mistake never happened. cause there goes all the money I paid :evil:.

Well I've made no foreseeable progress, and my MP3 player is still bricked (1.8 inch LCD with SigmaTel MSCN chip). If this is of any help, then SigmaTel firmware version is 885.282.509. I'm feeling doubtful about recovery so I'm just going to make arrangements to buy a new mp3 player. I knew I should have probably gotten the Sansa instead.

Re: Sigmatel recovery guide (Updated)
 

Re: Sigmatel recovery guide (Updated)
 

I bricked my onyx 2gig the first day i got it. when updating the firmware i got a screen that said i need to reboot for changes to take effect for my new hardware so i clicked ok and of course i could never get the player back up. took it to the store and told them it never worked and they replaced it.
Not gonna mess with the firmware now lol.

Re: Sigmatel recovery guide (Updated)
 

Hi friends!

An year ago i found solution about one MP4 player here. I have nother problem: Matsui 140MR 4G, when i try to start it on the screen appears "Boot error". This problem starts when my brother did something with the player (i think he tried to format it). When i put it in the USB computer's port it recoignze the player as USB Mass Storage Device (as normal) BUT with 0 KB space. Second format is not possible...

I search many places and forums but i found solutions only for older models. This one is with Sigmatel chip 3630 and the older software not recognize it (stuck on the "searching connected devices" screen). Can anyone tell me what i can do (except throw it on place where no one can found it ;) ) I have Windows and Linux operating systems so if someone can help i'll be happy :)

Re: Sigmatel recovery guide (Updated)
 

Hello All!

I have Proline MP702SF model.
It looks like this:
http://di1.shopping.com/images1/pi/a...702SF+4+GB.jpg
and it has 2GB memory.
I have a wrong firmware installed. I tried it since the player was way too quiet. When I listen to it, I could hear my own voice and everything around me. I thought downloading a new firmware would solve this but instead it is dead now.
I have tried most of these things posted here and none works. Sigmatel file starts to extract the first file but it is working it endlessly.
Is there hope? I hope so.
PLEASE HELP!!

please anyone have maxfield g-flash firmware for 512mb and 1gb please send me since the site is down i cant have it i have searched the net but couldn't found one yet.
aryanengineer@yahoo.com

wrb
Aslam Ahmed

memorex mmp9008 Update problem
 

Hi
I have a Memorex mmp9008 http://www.memorex.com/en/Portable-E...ayer/support/]
Spec:
*8Gb
*FM tuner
*2.5 tft screen
*Micro SD slot
*Voice and FM recorder
Plays:
*Pictures
*Music
*Videos
*TXT
I was trying to update the firmware to 036.100.201 with the sigma tel Updater,(Provided on the memorex site for this device.)it said it was completed but now my player won’t display anything just the lights will go on.
I can see it in my Windows Device manager but I try the Play button holding thing and Updating the driver from windows but nothing happens. It does not go to recovery mode.
The updater That screwed me was:
*Version: 1.766.0.000
*Base SDK: SDK4.420
*USB Vid_pid: 066f_a010

I also tried with the Updater provided in this thread. With no luck.
Thanks in advance.

Need help For NEO m'dj mp3 player
 

I need firmware for my old MP3 player NEO m'dj 2GB
Model: MP-02F
Chip: ASIA ONLY ASBR3304
Pictures:
Inside: http://store4.data.bg/ratofer/PICTURES/ABCD0008.JPG
Outside: http://store4.data.bg/ratofer/PICTUR...P02F%20MDJ.jpg
I dont know number of files included in firmware.
If anybody have solution let answer me please.
Good luck.

dead s1 mp4
 

Hi all.
I have MPMan MP-fub35. He does not turn, is defined as flash, help with finding firmware.
The manufacturer's site has everything you need, but the program and firmware for your player model on-chip ATJ ... may I have the Chinese fake, because the original looks different. ::Sunstech::
sorry for machine translation, I do not speak English
Sigmatel 3502
Hunix HY27UT084G2M-512MB
STFM1000

how tu download recovery tool from first post under 1.1 when i follow the link there is a new link in old forum but i can´t log in or register so i can´t download?!
Or someone have a firmware for maxfield max-one 1gb? (smtp3503 chip inside)

thanks in advance

All links work for me and they do not ask for any login.

hello!
i have this mp4 >>> Buy Cheap FREESHIPPING "Galaxy" MP4 Watch (NXV) MP3 Video Photo Flash Disk Record 1GB (DS-601)

i had light problem( no light) so i tried to update firmware with this programm >>> Chiros Sigmatel MSCN STMP3500 MP3 Player firmware
this program found new firmware and update it my watch mp4 player,but now is not boot at all!
and when it connect to my computer it recognized as flash disk.
please help me!
what i must do to alive my watch mp4 player?

Hello.
I have recently bricked my mp4, a Sigmatel Well MP4-PLAY01, looks like this one
http://www.zassproteus.ro/templates/...4play012gb.jpg. It is the 1Gb version.

I have downloaded Th3_uN1Qu3's firmware upload (his is for the 2Gb version, this might be the cause for the crash, although mine had the same firmware version as his -2.620.001-) followed the guide, but failed.

Now all I get is a white screen at best, accompanied by the Windows Xp plug in sound/plug out sound. Also it doesn't show up in My Computer.

Can anyone guide me towards reviving my player?
Thanks in advance.

Update: I keep getting 'media state is not initialized' when attempting to flash it now.
I'm also getting a 'Drive not accessible. This request could not be performed because of an I/O device error' when trying to access it from My Computer.