Sigmatel recovery guide (Updated)

sabak · #51 (**permalink**) 20th Nov 2008, 2:46 am

i have
INVION MP3

MP3-FMT01-IEU
and i need firmware... please help me..

metllic_grunz · #52 (**permalink**) 27th Nov 2008, 12:10 pm

hi there, I have below device,

Brand : HCT
Model : EM700H
Board : Sigmatel stmp3520
Chip : Samsung 516
Unit Dimension :2.51 x 1.06 x 0.62"
Details : Multi-Codec MP3/WMA/ASF/WAV Flash Memory Player w/ FM Tuner(512MB)

Tried using Chiros_Sigmatel_MSCN_STMP3500_MP3_Player and Sigmatel_Updater_1.548 but nothing happens, currently comp. is showing as removable device.

Tks in adv.

Th3_uN1Qu3 · #53 (**permalink**) 5th Dec 2008, 1:51 pm

Could you also post a picture of your player and tell us the screen size?

That looks like a newer chipset, i'll try to find some info.

metllic_grunz · #54 (**permalink**) 10th Dec 2008, 3:04 am

here it is

screec size : appx 1.25 L x 0.75 H

selcuksl · #55 (**permalink**) 10th Dec 2008, 2:20 pm

i need this firmware SIGMATEL STMP3504 LAE-TB6 A04374, but firstly i must reset this mp4 player how can i do this??????

roandi · #56 (**permalink**) 22nd Dec 2008, 1:26 pm

i have a WELL mp4 2 gb player that i just bought today... i installed the driver from the cd but after trying to copy a movie file onto it, it gave me a error and i can't turn it on since... even the computer can't recongnize it. It comes back sometimes but only when I keep the on button pressed for 10-15 sec and even then for only 2-3 seconds...can someone help me please? 10x

Sciens · #57 (**permalink**) 23rd Dec 2008, 11:39 am

Hello!
I have a problem with my MP3 Player :/ It´s an Avant MP500 with 1024 mb memory, based on a Sigmatel 3502 L100 - CA4 U01142 0540 Chip. The NAND chip used is a Samsung 540 K9W8G08U1M PCB0, the board number is something like JT308MAINV1.9 2005.07.09. It is working... at least something like that. The firmware died a few days ago and I had to replace it with a firmware designed for a similar device. The Player is detected as such and able to play music, but the display just contiously lights up blue and the buttons don´t work as they should (e.g. the button "forward" lowers the volume, "louder" changes the EQ-settings and the "stop" button switches to the next song... rest doesn´t work at all).
To cut a long story short, I need working firmware!

Best regards

NEW06 · #58 (**permalink**) 24th Dec 2008, 3:44 am

Hi Guys,
I have a pb with my Samsung Z5
It can't be recognised on my PC , so I have tried in UMS mode with no succes and finally by disconnect the battery and hold the button in the middle of the pad when connecting it , at this time it is seen like a stmp3600 device .
When I try software to dialog with the player in this recovery mode, software given by the updated guide (chiros sigmatel mscn stmp 3500) I have a message that indicate that the device is detected but immediately there is an error message "unable to write firmware data" .I think this is because I don't have the right firmware for my player .
So where can I find these files ?

Thanks for all

knob · #59 (**permalink**) 24th Dec 2008, 5:08 am

Have you tried this firmware:-
http://downloadcenter.samsung.com/co...pdate_2_47.zip

It's version 2.47, afaik you just copy it over to the player and restart.

NEW06 · #60 (**permalink**) 24th Dec 2008, 5:32 am

Quote:

Originally Posted by knob";p=&quot

Have you tried this firmware:-
http://downloadcenter.samsung.com/co...pdate_2_47.zip

It's version 2.47, afaik you just copy it over to the player and restart.

How can I copy this in my player ?
It-is not recognised as a player, Ineed to enter in recovery mode but all the sigmatel Prog use 4 or 6 files of "firm"
This firm is only one file
So I don't understand what I can do