dead mp4 player no brand

[littleandi]

Originally Posted by ron3003";p=&quot

ftp://mympxplayer:mympxplayer@218.97....51_070526.rar

This appears to be the only other firmware for your particular board at the s1mp3 english site. Give it a try anyway, you can only end up with the same blue screen again if it doesn't work.

getting there now im stuck @ the blue hourglass screen

[littleandi]

i have just bought a identical player from ebay

can i clone the working one and flash my broken 1 too repair if so what and how is the best method (i.e best program/s to use and instruction on how too do it ) and thank you all for your help in the past and hopefully after this

[zrock]

yes you can.be sure its really an identical with your dead player..same RAM and FLASH chip.you can use s1clone heres the link below..

http://www.stud.uni-karlsruhe.de/~uw...in32_setup.exe

s1clone is user friendly you can learn it in a flash.


Frequently Asked Questions On s1clone:

The application fails to run!

the application expects the "libusb0.dll" to be present either in the application path or inside window's "system32" folder. this dll is attached to the s1clone archive, inside the "usb_driver" folder. if not done already, please copy this file to the location where you have extracted "s1clone.exe" before. instead, you could also install the libusb driver which will automatically copy the needed dll to your windows system32 path.

What to do on the "Semaphore Timeout has expired" exception?

it seems this problem isn't caused by the player, but by the computer itself. some usb ports (maybe v1.1 ports), don't work properly with the libusb/swan driver. using another computer to clone the player may fix this problem.
top

[giameg]

I have the same problem i have three identical fake ipod
chip: AK1025
board: cj91-808 2007.1.19
screen 080204lkd-t1.72
one is functioning the other two give a blue screen on boot. Explorer doesn't recognize them, but device manager see an usb adfu device (?)
Still i cant get the player in real adfu mode, mp3 disk tool can't see it.

What i do wrong ?