dead mp4 digital player 2nd gen. nano clone

[kenotron]

no backup made
fake 8GB, real 1GB
AK1025 , with fm radio
nano clone, 2-nd generation
main board KJT-080FV1-M
LCD- LKD-1697V / C144-01-V3
the screen is allmost black (only backlight and the device is found in explorer as removable disk 1GB)
don't know the real FW version
the seller from ebay (100hitrate) sent me FULL FW which is "C203(97)_n2_v1.1", but no change
any ideas? ...or someone may have the same working player
thanks in advance

[zrock]

have you read the dead recovery guide?if yes your almost there..

then if you need the full firmware for your player..

try this FWs..

http://rapidshare.com/files/94452507...070906.fw.html

http://rapidshare.com/files/94454038...070829.fw.html

Goodluck!!

[kenotron]

10x zrock, and the results:
first link - mp3 player utilities 4.15 says incorrect upgrade file
second link - upgrade suxessfull, but nothing really usefull happened - still still no image on the screen and player is not removable hard anymore..only an ADFU in device manager
I tried all types FW version 9..but nothing happened...
the interesting thing was, that primary there was a hourglass, and after first firmware upload attept this hourglass dissapeared, now with some fw from this forum the device working only as removable disk

[zrock]

okay kenotron..good effort..the thing in this matter kinda a trial and error you know....so youve said that the seller send you the full fw?..what you mean it didnt work?..can you ask again the seller for another full fw?..

[kenotron]

yes..I did that , but there was no answer anymore
the only thing he sent me was "C203(97)_n2_v1.1", and it is not the correct firmware
i'm not sure if I make some pics of the device
if it will make the picture clearer

[zrock]

maybe if you can ask again the correct firmware from the seller..its your big chance..you know..

[kenotron]

anyone have
QY960FV1 STLS LKC_9112_01_01M_QY91.rar ?

[zrock]

Have a look at here:

http://www.mympxplayer.org/s1-mp3-pl...et-vt8747.html

[interuptor0]

the original firmware is correct. the problem come from LCD. maybe have poor connection on board. u can do re-solder if u have the tools and skill.

[mrtknc]

hello friend i need this firmware can you help me?
mrtknc@hotmail.com
regards