Need Firmware for board H45-3-A / ATJ2058W

mitkoseksa · #1 (**permalink**) 17th Apr 2008, 7:28 am

Hello, My mp4 player is dead. Please help me to find firmware for this device
Board : H45-3-A
Processor: ATJ2085W
Memory: Samsung 619 K9F4G08U0A (512MB)
Display : Giantplus KFM136F01-1b
FM : SP3767HN
Please Help me.

zrock · #2 (**permalink**) 20th Apr 2008, 11:54 pm

mitkoseksa,to find your firmware have a look at the post link below.It will guide you on how & where to find a compatible firmware for your player.

http://www.mympxplayer.org/s1-mp3-pl...om-vt8747.html

mitkoseksa · #3 (**permalink**) 21st Apr 2008, 3:50 am

Quote:

Originally Posted by zrock";p=&quot

mitkoseksa,to find your firmware have a look at the post link below.It will guide you on how & where to find a compatible firmware for your player.

http://www.mympxplayer.org/s1-mp3-pl...om-vt8747.html

Hello zrock,
I read this guide, but I not find firmware for this board. I tested with full firmware ATJ2085 and with this firmware but recovery process is not success. After firmware upgrade, I switch on my player, and I see "the blue screen".

s1fw · #4 (**permalink**) 21st Apr 2008, 5:21 am

http://www.s1fw.com/Actions-ATJ208X/...136F01-1b.html

GOOD LUCK FOR YOU

mitkoseksa · #5 (**permalink**) 21st Apr 2008, 7:25 am

HI s1fw ,
I downloaded this firmware. After that I made connection between the pins on one side of the chip and installed USB 2.0 (FS) ADFU Device, after that I started Mp3 player upgrade tool ver.3.86, selecting H45-3+FM-Giantplus KFM136F01-1b.bin, clicked on the button "recover firmware". In status I saw 'scanning the firmware' and after 1 minute I saw this error: Read or write device information failed! Please exit the program and check if device is connecting!
When I tested with full 3.5.37 firmware I finished upgrade process successfully but the device is not working.

tcu212 · #6 (**permalink**) 21st Apr 2008, 7:45 am

can you turn on your mp4?

mitkoseksa · #7 (**permalink**) 21st Apr 2008, 10:35 pm

Yes, I can turn on my player and used it flash memory but screen is only Blue.

tcu212 · #8 (**permalink**) 22nd Apr 2008, 12:50 am

it seems that you've got the wrong firmware

mitkoseksa · #9 (**permalink**) 23rd Apr 2008, 11:03 pm

Quote:

Originally Posted by tcu212";p=&quot

it seems that you've got the wrong firmware

Yes, Can you help me?

tcu212 · #10 (**permalink**) 25th Apr 2008, 12:10 am

try the firmware again, the one s1fw posted, i think that should work