Sony fake PMP Show only " LOADING..."
 

Please help, I have Sony PMP when power just show "LOADING.." with blue background
It can't connect to USB, when connect nothing happen, how to connect it ?

Here are details :

Chips :Sunplus SPMP3052A-HL1710805
Board : AJ262_V2 080111
Hynix HY27UU088G5M
Winbond 352WH W986416DH-6
Camera ZTXBR30LG-1

thanks in advance

can i see the pic of your player dont know if we have the same player so i can upload the firmware

My player can't detect by PC can you give me procedure how to connect it, coz i've try combination A+OK, B+OK, M+OK, etc but not working ...

thanks in advance

Re: Sony fake PMP Show only " LOADING..."
 

Is the problem solved???

A+OK, B+OK, M+OK, etc but not working

iam also in same trouble with same player!!!!!!!!!!!!!

but the chip is ak3631lq14402 fs08c8


plz plz plz help!!!!!!!!!! :oops: :?: :?: :?: :( :( :( :( :( :( :( :shock:

Re: Sony fake PMP Show only " LOADING..."
 

i have this same problem...

here's mine...

http://img300.imageshack.us/img300/7...0016ux6.th.jpghttp://img300.imageshack.us/images/thpix.gif

HYNIX KOR
HY27UT088G2A
TPCB 819H
AJ282_V4 - 080412...

someone show me a button inside the player play a role of combination a+b ,you can access to it by entering a screw driver or thing like that in the hole of video out to tv,keep it pressing and then plug usb
in my case i cant restore it by this method , my mp5 was very damaged by trying to short circuit a chip,or the driver isnt the good one.i dont know
try this method if you mp5 is realy died.

Re: Sony fake PMP Show only " LOADING..."
 

Hello

I have the Gemei X 720 that works fine,
If :cry: anybody knows how to extract the firmware, I could send it to you for a try :-)

Re: Sony fake PMP Show only " LOADING..."
 

pls firmware it

i have same problem

I have the same problem too!
 

details:-
sunplus spmp3050
version:-v4.01.081017

Re: Sony fake PMP Show only " LOADING..."
 

i have the same problem... two kinds of mp5 sony spmp with cpu spmp3052a
firmware aj282_v4

loading with blue background..... not detected with my computer when i connect it. pls... tell me the solution how to detect it.


tnx.

i also have same problem.

there is no 2.8 volt at usb pin 3.

so it not connect with pc.

and when i plugin charger diode also too much hot.

wbr

i also have same problem.

no idea abt. firmware.

there is no 2.8 volt at usb pin 3.

so it not connect with pc.

and when i plugin charger diode also too much hot.

wbr

Dead Players
 

i also have same problem.

no idea abt. firmware.

there is no 2.8 volt at usb pin 3.

so it not connect with pc.

and when i plugin charger diode also too much hot.

wbr

Re: Sony fake PMP Show only " LOADING..."
 

Try this one...
http://www.megaupload.com/?d=PAVSD16H

[quote="Krisnin";p="58499"]
Try this one...
http://www.megaupload.com/?d=PAVSD16H
[/quot

main problem is not connect with computer.

without connect with computer how can flashing [ upgrade or downgrade ] it?

wbr

Re: Sony fake PMP Show only " LOADING..."
 

Hey Guys,

I dont know if this will help you or not but only try on your own risk.

Mine one (Kingzon M42P) was just rebooting when connected to USB and was not getting detected.

I put a jumper from one voltage regulator ( form IN pin) to the VDD. Basically raising the core voltage and after that it stopped rebooting and windows can detect it.

My chip = AK1025
My VDD = original about 1.6 to 1.8 (max is 2V) - Now its 4.10 V

Its written that chip can get damaged if VDD is more than 2 V ( please read the datasheet of your MC)

Its running hot but i couldn't manage to work it out in any other way. I cannot find which component is faulty but when i measure the voltages on the chip, all are with in the limits. So i have no idea why its rebooting. May be battery is gone but still i couldnt find a reason why its rebooting with USB plugged in. But i still cannot flash my chip.

Try it if you really can really solder on SMD's.

Hope it works for you
Ajit