I need "Wilson 3.5.37" dump. Please...

Tom_Tom · #1 (**permalink**) 11th Jan 2009, 1:41 pm

Hi! My player looks like:

Technical:
Flash memory: 512 Mb
Chip: Samsung k9f4008woa
Display: LCD, 1.5", 65536 colors

In player menu "firmware" was written:

LISONG
LSC_802_01
2006/06/19
SDK 3.5.37

In program "RdiskUpdate" written:
S1 MP3 Player
Wilson Co. Ltd.
Version: 3.5.37

I tried many firmware from this site (3.5.37), but i always see black or white screen

I hope you will help me ... :wink:

sndestroy · #2 (**permalink**) 12th Jan 2009, 2:34 am

You need to open the player and search for some white text written somewhere in the board, that's the board ID and with that you can find right firmware.

Tom_Tom · #3 (**permalink**) 12th Jan 2009, 9:12 am

Thank you for your reply, sndestroy.

1 - Samsung k9f4008woa
2 - SPT SP3767HN 06FS19
3 - (very indistinct) - ATU2085W FS263AB

That's all there is on the board

Unfortunately, I was not able to remove the board. This is hampered by usb and headphone jack. But on top display can see (maybe this will help):
CM500 12ACT6-01ACT6 FRE 060515.

I found this same player:
http://mympxplayer.org/viewtopic.php?t=2890

Quote:

PLayer front write: sony ex-4278 (fake)
display 1.8 inch

Processor chip ATJ2085Wb f5263a8 564
Memory Samsung 616 K9F4G08U0A PCB0 fudx91AA
FM chip is sp3767HN 06FS19

Buttons are:
front side: <prev> <next> <volume> <menu>
right side <play>

Board ID: QY-"X*"14cv2-stls 2006.05.20
*I can't view first symbol, there is a hole in the board

sndestroy · #4 (**permalink**) 12th Jan 2009, 10:40 am

CM500xx is part of the LCD model number, it helps but in fact is not the board ID. You need to pull the PCB out and search for a white text line written somewhere in it. Its better if you not rely on apparently similar devices, but on your own player ID instead.

To bring the board out start by pulling up the side opposite to connectors, then moving pcb to the right to free it from the metal. The LCD may be glued to case, put gently a bit of force and the whole pcb+lcd will come out...

btw. that player is relatively easy to recover

Tom_Tom · #5 (**permalink**) 12th Jan 2009, 1:15 pm

Thank you, sndestroy.

I withdrew the board (prevented small screws under the speaker).
S/N: QY-14C2-STLS 2006.05.20

I have found here:
http://mympxplayer.org/firmware-pma-300010-df385.html
But RdiskUpdate written:
Error / Invalid upgrade firmware file!

My player with FM-radio and 3.7 V battery - perhaps because of this?

Tom_Tom · #6 (**permalink**) 12th Jan 2009, 1:51 pm

THANK'S!!!!!!!!!!!!!

http://mympxplayer.org/firmware-for-...yer-df175.html

But now player not responding to the buttons. For example the button "Volume" - now "Next". How can I fix it?
Thanks!

Tom_Tom · #7 (**permalink**) 13th Jan 2009, 7:43 am

Now my player works - and I use the "waterlily-v1" to change the functions of the buttons. But it is uncomfortable with this firmware. Earlier button | <<and>> | performs two functions:
1. Jump menu (forward - back)
2. If you press Volume, appeared screen of volume control and buttons control the volume
This firmware can not do this.
Can I fix this firmware - http://mympxplayer.org/firmware-pma-300010-df385.html (RdiskUpdate written: Error / Invalid upgrade firmware file!) - because it is ideally suited for such a player?
Thank's !!!

sndestroy · #8 (**permalink**) 13th Jan 2009, 6:14 pm

The player at the link you mentioned is the SAME as yours, even buttons & board ID are identical.
So what happened is very strange.. this FW should work without flaws...

Try with different type/version of the update program, i suggest Product Tools 4.19

lolita · #9 (**permalink**) 14th Jan 2009, 1:56 am

Quote:

Earlier button | <<and>> | performs two functions:
1. Jump menu (forward - back)
2. If you press Volume, appeared screen of volume control and buttons control the volume
This firmware can not do this.

How does it work now? Is volume unable to be controlled at all, or forward/back not working?

Tom_Tom · #10 (**permalink**) 14th Jan 2009, 12:15 pm

No, this firmware is working well. I meant that it was more suitable for players who have 6 or more buttons - a separate "forward / back" and "vol + / vol-". The picture I showed that I had only 5 buttons and the bottom two buttons at once served two purposes - "forward / back", but when you click "Volume", the same buttons control the volume.
So I wanted to use the standard firmware - http://mympxplayer.org/firmware-pma-300010-df385.html - but it can not be installed. Can I fix this firmware? Or find a firmware for the player with 5 buttons?
Thank you for your answers!