PMP Sunplus SPMP 30528 Can't get into firmware

iSPOTpr · #1 (**permalink**) 18th Jan 2009, 9:09 pm

Hi, I am trying to get into firmaware of my PMP with Sunplus chip SPMP 30528. It is a chinese Slide panel one. I tried to hold down several buttos while connecting to PC but nothing happens. PC recognizes two new drives: internal memory and SD card slot, but when trying to use FRM no device is detected. Could anybody help me out!!!

jbaconnh · #2 (**permalink**) 20th Jan 2009, 10:23 am

First, make sure you have the webcam drivers in a directory on your pc, the driver can be d/l with the FRM tools here...
Sunplus FRM Tools with driver

Make sure your pmp is turned off when plugging in the USB. On my spmp3052 based unit it was the ESC button that did the trick, keep trying buttons until you get it.

When you hear the new usb device found point it to the directory with the drivers.

ace_venturia · #3 (**permalink**) 28th Jul 2009, 12:57 am

need drivers for my pmp to use frm pro
this device hangs on startup
device is not detected by frmpro as well the drivers aren't identified
please need it soon