Anyka 3631 Touch Screen
 

http://edge1.dealsdirect.net/images/...uct1_13422.jpg

on ebay.
spent $100 to buy this
Anyka 3631 chipset
touch screen player.
(ANYKA AK3631LQ14402)

charging circuit is slow.
charging circuit bad design.
not 5 hours, but 25 hours
to charge.

was working for 1 week.
then suddenly, dead.
on boot up shows
blank white screen

on connect to pc
flash-disk-drives not recognised
or displayed.

;;;;;;;
in the downloads forum
i got the anyka 3631 english tool
to write firmware directly to
nand memory

using default settings of this tool
i upgraded firmware to 100% success.
Now when i connect to pc
drive H: 8gig
and drive I: SD-card
is recognised.

but the screen of the player
does not boot up or turn on.

does anyone know how i can
get the right firmware ?

does anyone know how i can
tweak the Anyka tool settings ?

Hi,
Can you please send me the link to the firmware and the english tool? I am having the same player with same problems... but my problem was that it was not going after the welcome screen, I updated the firmware and now only getting the white screen... no drives are detected, can you please give me the firmware that you have? So that I can use it atleast as a Pen Drive .. please please

I need your help!
 

Hi. I have the same problem and let me know if you've been able to help me solve it.

Thanks.