need firmware for AK1025 XY-1.8CC-V2
 

Help me need firmvare for MP4 player AK1025 board BKS25002kv11 display xy-1.8cc-v2.

Re: need firmare for AK1025 xy-1.8cc-v2
 

http://www.s1fw.com/plus/search.php?...lt=13&PageNo=2

GOOD LUCK

Re: need firmare for AK1025 xy-1.8cc-v2
 

Thanks, all firmware in this web page bad version - display blank :( :cry:

Re: need firmare for AK1025 xy-1.8cc-v2
 

What about these?

http://www.s1fw.com/plus/search.php?...lt=13&PageNo=1

Try any that have 1784 in them. Your display seems to have the SSD1784 controller.

edit: forget the CM70048, that's a Samsung-compatible and not related to 1784.

Re: need firmware for AK1025 xy-1.8cc-v2
 

All firmware am tested,mine display seems is do not comatible this firmware.Display tipe:Rohs Bkeestar XY-1.8CC-V2 (XY-1.8 V KM081219)

Re: need firmware for AK1025 XY-1.8CC-V2
 

Could you post a picture of the display, showing the numbers?

Also, check around the edges and the back, not just on the FPC.

Re: need firmware for AK1025 XY-1.8CC-V2
 

Chip:AK1025
Memory:27UV08BG5A
Board BKS25002MW11
[img=left:08c856429e]http://img3.imageshack.us/img3/4305/lcd3.jpg[/img:08c856429e][img=left:08c856429e]http://img3.imageshack.us/img3/1736/lcd2.jpg[/img:08c856429e][img=left:08c856429e]http://img46.imageshack.us/img46/6674/lcd1.jpg[/img:08c856429e]

Re: need firmware for AK1025 XY-1.8CC-V2
 

1.8CC... did you try the CM70048 one there as well?

Tested firmware for CM70048, display is blank. :-(