rockchip RK2705

jmv_driver · #1 (**permalink**) 6th Jun 2009, 1:39 pm

Today my mp5 player that i had bougth in ebay he is dead! when i plug the cable to the pc, he detects one drive unit and i can acess to my files that i have into the player, but i have no image in player, I cant turn on the player. i had open the player and i had take this pictures of his components.

what i had read from the chips:
ROCKCHIP RK2705
HYNIX H27UCG8V5MTA BC 905A M1WJ2342
MIRA P2V28540BTP 5409FA0X-6

what i can do?
apreciate your atencion!

Regards

jmv_driver · #2 (**permalink**) 6th Jun 2009, 2:08 pm

I had used this file "rkusb.tag" and had put it into main memory and one new drive appears but when i try open the new drive with the explorer windows XP and Vista he said to me that is impossible to open and i need to format for open the partition( the partition have 75 MB). I dont know what to do!

makd511 · #3 (**permalink**) 7th Jun 2009, 12:24 am

that new partition is where your firmware should be - did you make a backup at all, if not look in the downloads section for a similar looking player firmware and copy the files over to the firmware partition BUT no guarentee that they will work at all

jmv_driver · #4 (**permalink**) 7th Jun 2009, 2:24 am

Quote:

Originally Posted by makd511

that new partition is where your firmware should be - did you make a backup at all, if not look in the downloads section for a similar looking player firmware and copy the files over to the firmware partition BUT no guarentee that they will work at all

But i cant backup the firmware, because windows dont detect what is in the drive. windows says to me that i need format the drive to use it...

makd511 · #5 (**permalink**) 8th Jun 2009, 2:08 am

yes i know this is bacause the firmware has been killed now, no way to get it back, i was aasking if you had made a backup before

you need to look in the downloads section for similar player firmware, there are some that are for similar player to yours, get the files, format that drive and copy the files onto it

jmv_driver · #6 (**permalink**) 8th Jun 2009, 2:59 am

No, I hadn't any copy..

i had just found this forum because i had this problem and i had searched in google. ok. thanks then. I have some questions i had only found firmware to chip 2706 my chip is 2705 i have possibilities to put the firmware of 2706 in 2705? i hadn't found no firmware to 2705. To format the drive of firmware what is the right file system? thanks for all!

lolita · #7 (**permalink**) 9th Jun 2009, 12:50 am

2705 seems to be only a slightly older revision of 2706. Try the firmware anyway, since you can always access the firmware partition even if the player is inoperable.

makd511 · #8 (**permalink**) 9th Jun 2009, 1:50 am

as far as i know there is no 2705, only 2706, 08, 10 and 12 in the 27 series, i think it will say 2706 but some of it has been rubbed off, so yes, those will be the ones too use

FAT 32 for the files syetm and when you download any files there wil be several folder called APPDATA, SYSTEM etc, just copy them all to the firmware partition, safely disconnect and see what happens, i have the same player as you and my firmware is up there somewhere, i have bricked the player so many times, in fact it bricks on a daily basis!!! - i dont use i now

AleMaxx · #9 (**permalink**) 9th Jun 2009, 4:58 am

Hi, Ive got a similar one. Its a 1 gig RK2706 with 3" touch screen. I have a backup of the firmware but havent uploaded it yet. If using the other RK2706 firmwares here doesnt help Ill upload it. Here is a picture:

Regards

jmv_driver · #10 (**permalink**) 29th Jun 2009, 3:35 pm

Bad news i had tested all RK 2706 firmwares but no one works, I can see the main menu in allmost firmwares but my touch screen dont work, and with te buttons i cant go to anywhere. where can i try to find my firmware??????????

PLEASE HELP

firmware 2705 NEEDED