MPOWER PMP has white screen. SUNPLUS SPMP3052A-HL171 BOARD SK613B-070818
 

Hi guys.
I have big trouble with PMP like on the picture.
http://images48.fotosik.pl/194/c12a388bce37d118m.jpg
It seems, PMP need new firmware. Now i can switch on and i have white screen, sometimes i can't switch on. PMP has connection to PC only when i hold ESC button and put USB cable.
Technical info:
SUNPLUS SPMP3052A-HL171
BOARD SK613B-070818
LCD HR28B02 071112

May You help me in any way ?

Here:

SK 613B-070818

http://www.megaupload.com/?d=PHBF4YSF

Thank you for answer.
I try today afternoon and will give you information about progress.

Thanks for posting this.
Can you post more information on this so we can upload it to our site please? If it works, would be great to share it with everyone else as well. I just don't want to see your upload disappear or get deleted by Megaupload that's all.

Hi.
I try mentioned firmware and problem still exsist. I got the message from FRM:

When I try firmware only:
Now PMP is completly dead, but i still have working connection to PC (ESC button+USB cable)

Any other ideas ?

Try reinstall your old firmware.

The universal firmware for SKxxxxx SPMP3050 here:

http://mympx.org/forum/firmware/4420...-spmp3050.html

According to @waldopulanco universal firmware doesn't support SK613B, and is designated to a little bit different type of processor, but I'll try. I have nothing to loose...

Delete all files from A\RO_RES\DICT\ folder and try again.

So, I did like You suggest and I have a little progress.
Firstly, I still work with SK 613B-070818 file.
Secondly, I can't program PMP with "Program all" setting, still
1 devices Detected !
[Dev NO.Undefined]: Check ISP core -- SUCCESS --
[Dev NO.Undefined]: Judge burn size -- FAIL -- RSV Size = 38273024
[Dev NO.Undefined]: Program All -- FAIL --
[Dev NO.Undefined] -- FAIL --
FRM_RES_SIZE_BIGGER_ERROR(22) -- !
but I can program using :Burn selecting" setting.
After that my PMP can switch on every time and displaying KIORA logo on white screen. That's all.
I think, firmware doesn't pass exactly. Maybe is any chance to edit input file in hex editor ?

Try in "Disk Img mode", here:

MEGAUPLOAD - The leading online storage and file delivery service

Good luck