Rk27SDK Dead [VIDEO]
 

Here is my mp4 player...
http://mympxplayer.org/pafiledb/imag...ots/392b_1.JPG 4 GB
What i have done ?

1. I put rkusb.tag on mp4 .
2. Reconnect the mp4.
3. I saw the hidden partition and before to do next step i save that on PC
4. I copy a theme from an internet and i paste over the hidden partition
5. After that i disconnect the player , when i tried to switch on , doesen't switch on (like in the video)
6. I formated the mp4 (I:) ,and after that i use the RK27 Device Manager v.1.4.0 to recover the firmware.

i did this and my mp4 doesen't work ... please help . I make a video to see !
What i suppose to do , to make this mp4 work ! PLEASE !

CLICK FOR THE VIDEO - Download Rk27SDK.flv - FisierulMeu.ro

I had in the past your same problem but i have solved reinstalling my original firmware on the player, with this procedure:

copy the rkusb.tag file to the player main memory, once the file transfer is complete, disconnect the usb cable and switch the player off. With the player still switched off, plug the usb cable back in and wait for the computer to recognise the new second removable disk ( hidden firmware partition 60Mb), if there are files into the hidden partition delete these files, then copy all the 4 required firmware folders + RKFSWFRC.FRC from your PC into the hidden partition .Then disconnect from PC and restart your player.

One question about your firmware uploaded here, it works?
It is for the player in this screenshot?
I'm not sure that your player is a generic unbranded RK2706 player... in your video I've seen RAMOS when you turn on the player... while on player on your pc screen (like in my player) this writing doesn't appear.
And then my firmware, like the other firmwares for my player, are all about 58 MB, while your firmware is 29MB. So I think that you have downloaded the wrong firmware for your player
I would try to update my old firlware but your problems posted in this topic worry me and I think that your firmware isn't good for my player...

i try a lot of firmwares , and i stoped to the ramos , only one when i install it , my screen turns on ... i will try what you tell me to do , but i am sure , will don't work , i tried different methods .. i hope to work this time ... btw that firmware i uploaded is from my player you see in the video , first time , before broke the mp4 , i have exactly mp4 player like on the youtube ..

So the last firmware (with the RAMOS writing) isn't your original firmware?
And the firmware that you have uploaded is your original firmware or RAMOS firmware? Tell me please.
If isn't your original firmware try to install in your player this: http://mympxplayer.org/rockchip-firm...one-df953.html, it's my original firmware.
Try my method and report here if it has worked.

i will try tommorow because is late today.

I hope you understand what i say ... My player was like that on the PC , but after i did a mistake , i was obligate to format the mp4 , and then i try differents of firmwares ... i hope to fix it:((

and thanks for the fast replys

Ok, I understand, but the firmware uploaded here: http://mympx.org/Downloads/p13_secti.../p13_fileid/46 is your original firmware or not?