Mp4 on blue screen turns off on firmware upgrade

Delta01 · #1 (**permalink**) 18th Apr 2010, 5:25 pm

Got a mp4 4gb 1.8'' screen, i got the right firmware, i don't care about and i don't want an answer telling me "maybe you got wrong firmware check this pages..." i know i have the right one, i just need my mp4 to stop turning off in the middle of the update, cause it interrupts the updating process and end up with a "read or write device information failed! Please close the program and check if device is connecting", it's working until that...

As said before no fuckings "maybe you got wrong firmware check this pages..."!

I'm looking for a serious answer not a lazy post

lolita · #2 (**permalink**) 29th Apr 2010, 9:15 pm

Are you sure you have the right firmware? Board, CPU, LCM, must match exactly.

Also check USB cable.

Delta01 · #3 (**permalink**) 30th Apr 2010, 1:50 pm

It's the firmware from the cd of the mp4, i also opened it on a firmware editor, everything matches, was hoping for a more smart answer something like static problems, resolding pins, not firmware stuff, if i say i got the right it's because i know the problem is not there, anyway, thanks for trying... Connection by usb cable is made, the mp4 reacts to it, it turns off in the middle of the firmware update cause of it, logical no?, if it reacts to the firmware update it's cause the connection is there, is it working properly? i guess i've tried with many cables, same story, so any other ideas?

lolita · #4 (**permalink**) 1st May 2010, 6:57 pm

Quote:

It's the firmware from the cd of the mp4

No. Board ID, CPU, LCM, MUST MATCH. Retailer will often put a generic firmware on the driver CD which is not necessarily correct one.