MyMPx.org

MyMPx.org (http://mympx.org/forum/)
-   Dead Players (http://mympx.org/forum/dead-players/)
-   -   Philips Aria Not Detected! (http://mympx.org/forum/dead-players/45869-philips-aria-not-detected.html)

theperfectpunk 20th Mar 2011 9:01 pm

Philips Aria Not Detected!
 
I Have a Phillips SA1ARA04K/97 MP3 player which i bought last year. It was working fine, but all of a sudden its power went off and a white screen is displayed when it is put in charging. At First When I Connected It To PC, I Recieved 'Found New Hardware ' Message. The Found New Hardware wizard detects ROM Recovery Mode and HID-Complaint device.
The Two Devices Highlighted Appear In The Device Manager.

ImageShack® - Online Photo and Video Hosting

Only White Screen Appears When The Player Is Put in Charging.
I Will Be Very Grateful To Anyone Who Helps Me Resolve This Problem.;)

DarkCraft 3rd Sep 2011 4:34 am

Dowload firmware , install they, then press vol+ and without releasing the button to connect the laptop, Recovery manager device must detect they, push recovery. Then the player must recoverю =)

DarkCraft 3rd Sep 2011 4:38 am

If it does not, I can help you

theperfectpunk 3rd Sep 2011 10:36 pm

Thanx!!!!!!
 
Thanx!!!! a ton

It worked flawlessly! You're awesome!

theperfectpunk 3rd Sep 2011 11:18 pm

Re
 
The Problem Still Exists!

The Philips Go Gear stops working as soon as i disconnect the usb cable.

When i connect the USB Cable again, it again says that you need repair the device!

Binh@MyMPx 4th Sep 2011 1:38 am

Quote:

Originally Posted by theperfectpunk (Post 288614)
The Problem Still Exists!

The Philips Go Gear stops working as soon as i disconnect the usb cable.

When i connect the USB Cable again, it again says that you need repair the device!

When you say "stops working" you mean that it just turns off? Or does into a recovery mode as soon as you disconnect/unplug the USB cable? If it just turns off, then your player is not getting enough battery charge to it so it turns off and perhaps that is what's also causing it to go into repair mode? Have you tried a different USB cable to connect and charge your player? What if you charge your player using the wall charger instead, does it make any difference?

DarkCraft 4th Sep 2011 7:12 am

Quote:

Originally Posted by theperfectpunk (Post 288614)
The Problem Still Exists!

The Philips Go Gear stops working as soon as i disconnect the usb cable.

When i connect the USB Cable again, it again says that you need repair the device!

The player spent a long time and the battery is discharged below a critical level, if you can not just charge you have to disassemble the player - to replace the battery or charge it directly to a microprocessor-type charging IMAX b6.

theperfectpunk 21st Oct 2011 11:08 pm

Re
 
Quote:

Originally Posted by DarkCraft (Post 288617)
The player spent a long time and the battery is discharged below a critical level, if you can not just charge you have to disassemble the player - to replace the battery or charge it directly to a microprocessor-type charging IMAX b6.

But After Flashing The Player, Philips Songbird and Windows display that it has 26% battery remaining. It gets charged as i have noticed that each time i flash the battery meter increases

DarkCraft 21st Oct 2011 11:46 pm

Quote:

Originally Posted by theperfectpunk (Post 288713)
But After Flashing The Player, Philips Songbird and Windows display that it has 26% battery remaining. It gets charged as i have noticed that each time i flash the battery meter increases

Windoцs not have accurate readings the battery, charge directly.

theperfectpunk 22nd Oct 2011 3:19 am

Re
 
How to charge Directly?
Please Elaborate.


All times are GMT -7. The time now is 12:30 pm.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2