i need some help for a dead nano like mp4 player !
 

i need an original firmware and a good flashing program for this player :
the orginal version is the 9.1.42 or 9.1.52 i have forget it :cry:

please help me and this is a picture of my 8gb nano like player :
http://img384.imageshack.us/img384/6527/dsc00003ws9.jpg
http://img384.imageshack.us/img384/6092/dsc00004pt3.jpg
http://img293.imageshack.us/img293/4798/dsc00005xz5.jpg
http://img508.imageshack.us/img508/8533/dsc00006rz4.jpg
http://img134.imageshack.us/img134/7065/dsc00007sf0.jpg


he printing a blue screen when he start help me to give a new life at him !!!

thanks for any helping members!

ps: i'm french

AK1025
7l089ab 0bs

hynix kor
hy27uu08ag5m
tpcb 823f
mtujh942ja

spt
sp3767ahn
08ct76

essaye ses firm ^^
http://www.s1fw.com/Actions-AK102X/A...LW-2-7-20.html
http://www.s1fw.com/Actions-ATJ209X/...7732m-BKS.html
http://www.s1fw.com/Actions-AK102X/A...GS177SHOO.html

bonne chance

your fimware don't work

Re: i need some help for a dead nano like mp4 player !
 

Hello!

If you have a multimeter, the could you test the 7th pin from the right, on the display connector[under the display] - to which pin is this pin connected on the main CPU? (the AK1025)

I am asking because you may have the same problem as I do - The chip select enable line of the lcd might be connected to a non-default line. You seem to have a similar model to mine.

i haven't a multimeter, my mp4 after flashing a firmware boot with a blue scrren and 1 minute after, he reboot and my pc don't detect him

finally i want to sel my player or echange it with a fonctionnal player i can'tflah a firmware to him.