Looking for Firmware, Chipod Nano 3rd generation 8gb
 

Hi to everyone!

I need firmware for a Chipod,a 3rd generation Nano clone:

SCREEN = TGS177SH00
CHIP = AK1025
FLASH = Hynix Kor, 8 GB (see image 2)
BOARD = GOLZI G_18_Main_V0.6 2007.12.08

First time i changed the firmware was after the first reboot because it was showing the everlasting blue screen. The original firmware was a S1 MP3 player Wilson 9.1.52, even if the pc recognise it as a "actions" hardware.

This post is my last hope, because i've tried dozens of firmware, and everytime i've got that horrible Blue screen :( and please forgive me for the worst english you'll probably ever read :)

EDIT: here are 2 pics:
image 1

Image 2

EDIT:New photos.
I can't find the v0.6 of the firmware on s1fw, altough there's a 0.3 version that i'm not able to install in the chipod because it says it isn't a valid firmware. I should try with a full firmware 9.x.x that should permit me to access to the mp4 as an usb storage disc. Suggestions?

Re: Looking for Firmware, Chipod Nano 3rd generation 8gb
 

I've found this link in some topics:

http://www.s1fw.com/Actions-AK102X/A...1221-IPOD.html

but there's nothing there...someone can reup the firmware?

I Have also the same player. As my player went dead , after recovery I upgraded bya firmware on the net. from that time only awhite screen is seen. I will be very much thankful if somebody reup the firmware mentioned in the link above.

http://www.s1fw.com/Actions-AK102X/A...1221-IPOD.html

You can try this.

http://rapidshare.com/files/20824778..._1221_IPOD.zip

Re: Looking for Firmware, Chipod Nano 3rd generation 8gb
 

Try
http://rapidshare.com/files/20824778..._1221_IPOD.zip

AK1025 G-18A-Main-V0.6 firmware?
 

Hi!
I'm looking for the same firmware. My unit is ChiPod 3rd gen. Nano clone. It looks like the one on that page:
Sell The Apple Mp3 Manufacturer, Supplier & Exporter - ECPlaza

My ChiPod:
Chip: AK1025
Board: GOLZI G_18_Main_V0.6 2007.12.08
Screen: DJN DMT002FPC-A1 3G-2224 1107
Flash: HY27UU08AG5A (2GB)

I have neither installation CD, nor original FW for the ChiPod. When it died I installed FW "AK1025 G-18A-Main-V0.3 Board ver 9.1.52" that found in mympxplayer.org repository. Sadly, on boot display shows nothing except a white light. Perhaps, only v0.6 would be real remedy...
Now the download link gives nothing.
Would someone, please, re-upload that firmware? Or some alternatives, maybe?
Thanks.

Thanks for the hair strip image, was trying to figure that out.its my pleasure to post here

I feel strongly about it and love learning more on this topic. Thanks for posting such informative content. It is extremely helpful for me.

Blueberry Oat Yogurt and Sunflower Seed Smoothie