Looking Firmware for CTW500-JCT216D
 

Helo,

I find last firmaware for ELBE MP501

Control: CTW500
Plate No.: No plate number :(
Screen No.: JCT216D

http://img509.imageshack.us/img509/2351/elbewk4.th.jpg
http://img292.imageshack.us/img292/3071/elbe2lo7.th.jpg

Thanks

Are you really sure that there aren't any pcb ID number in it?
It is often covered with stickers, or under the LCD flex connector...


BTW, if your player works OK then don't try to upgrade anything, its too risky.

Re: Looking Firmware for CTW500-JCT216D
 

I attach photos all data of my device
http://img172.imageshack.us/img172/48/mp41wu5.th.jpg http://img238.imageshack.us/img238/557/pcbkw3.th.jpg http://img172.imageshack.us/img172/7523/pcb2qk8.th.jpg

my device is dead at this time,
http://img107.imageshack.us/img107/5175/deadzt7.th.jpg

I put the device in recover mode,
http://img261.imageshack.us/img261/5...overom5.th.jpg

after I flash with Action 4.05 Tools "Full Version 9.0.50 - 1.8 LCD" (same as the original version)
http://img301.imageshack.us/img301/6...n405hl7.th.jpg

and device remain on white screen :(
http://img301.imageshack.us/img301/6...reenkx2.th.jpg

I need to do something else?


Thanks!!!

There is no firmware for that board on the net, but I've found this:
http://www.s1fw.com/plus/download.ph...aid=4105&cid=3

It's the only FW that seems suitable for that JCT216D LCD, try it.

thanks for your answer but new error :(

http://img168.imageshack.us/img168/568/error1oc9.th.jpg

The error occurs with all firmwares tested.
Now the screen is black, AFUD device is detected, recover state is detected but Action 4.05 Tools fails.

EDIT:
the error disappeared,
I flashed with SCC-91020-2091N_1.8_JCT216d_5键.fw but screen remain white and device is not detected :(