MyMPx.org - Firmware for Rockchip RK2608 (Laser Mp351krf player)

follow this guide:-
You need to be in RockUSB mode first.
Double click on the remove hardware icon in your system tray.

http://i203.photobucket.com/albums/a...lipboard01.jpg

If you are in RockUSB mode you will see the icon in the window like this:-

http://i203.photobucket.com/albums/a...lipboard03.jpg

You MUST be in RockUSB mode to change your firmware.

To get into RockUSb mode
1) switch the player off.
2) hold down the menu key.
3)connect the USB cable
4) wait a few seconds
5) release the menu key
6) look for the RockUSB icon.

7) If you see the RockUSB icon, load the CORRECT firmware for your player using Consumerupdate program.

It this fails then as a last resort I suggest you do the Hard Reset already described to get into RockUSB mode and load the CORRECT firmware for your player using Consumerupdate program.

You will need to open your player to do the HARD reset, but only try this if you are confident with opening your player or you might break something!

You may find it easier on your player to try shorting the following 2 pins:-

http://i203.photobucket.com/albums/a...ola/dead11.jpg
These are the actual pins (posted on a Chinese website) which have also been found to need shorting to get into RockUSB mode, use tweezers or a small jeweller's screwdriver..

http://i203.photobucket.com/albums/a...ola/dead12.jpg

http://i203.photobucket.com/albums/a...ola/dead30.jpg

This would force the player into RockUSB mode upgrade mode, but you MUST look for the RockUSB icon

You will need to look for firmware RK2608 here:-
Download RK2608/RK2608A Firmware

I can't see any exact matches for your player you will need to experiment and guess, it's your only chance. Good Luck!