easy backup ur anyka 2.8 touchscreen pmp + firmware
 

hey ;)
before u test a new firm, backup ur hidden ak3631L / 2.8" anyka player firmware .. and share :cool:
"+" = ">>"
its easy, player off, press "+" button and hold, usb plug in, leave "+" hold ..
or: hold "+" and switch on the pmp, shows like freeze, now usb plug in ..
now u have 3 new partitions .. save all files on pc folder and unplug usb, then reset the pmp.

tested with xp-pro and tv1f568-v3.1 / 2gb pmp.

all files original from following 2.8" touchscreen pmp model.
to restore u need burntool from anyka. (look at next postings)

softwareinfo:
tv568 mlc v3.0.4.0
tv1f568_v2.0

hardwarecheck:
pcb: tv1f568-v3.1 / 18.02.2009
µc: ak 3631LQ14402 fs03f9
chip: 48LC8M16A2
flash: samsung 822 / k9gag08u0m /pcb0 / fcdf64pbc
cam: XHB 7678D
------------------------------------------------------------
falls hier deutsche auf der suche sind .. ich könnte euch helfen eure toten anyka player zu beleben.
die neugier auf mehr und besseres hat ihn gekillt, aber es gibt möglichkeiten zur belebung.

pse, i need a firm for following anyka pmp type

pcb: phm807v1.3
display: 63353 AA002AH
softwarespring mlc v3.0.3
hardwaremagic v2
ic1 = anyka AK3631LQ14402 - FS01J8
ic2 = Infinion HYB39S128160CT-8 / C2 / WWW89189 / 0218
(100 MHz 4B × 2M x16 SDRAM)
ic3 = Samsung 902 K9GAG08U0M PCB0 / FUD718XX (nand 16)
radio = spt / sp3767ahn / 08ht06
camchip = xhb7676an

tools and one firm, all u need to test / restore / backup blue and blackscreen dead 3631 anyka players ..
or easy backup to share :)

new ak burntool v2.1.1d (incl. settings and firm for player in first posting),
settings editor,
img tool.

http://ul.to/d77xwg

now its up to you, to share the best anyka cpu tools and firmware

Good work!
 

I feel stupid for not having found it myself - once I found the "M" button maintenance mode I didn't think to try the other buttons!

I have 3.0.4.0 as well - I have found older versions of the software but nothing newer

the easiest things are the hardest thinking :cool:

--------------------------------

AkResData.bin
DynamicFont4_16.bin
LangCodepage.bin

TV1F568.bin << Most Interesting, its a bit code changes in player series ! but the same file name !
check out and share .. i have tested this firmfile on my second player .. will run, but not touchscreen / button function .. both players from one ebay seller, but u can see a changed hardware series.
all other tested TV1F568.bin files without playerstart after flashing.
the rest of bin files (akres, font, lang) are not so important.

i think we need a good coder workshop to understand this little file (bit) changes. :D

hi
I am in the brasil
I also have a player of those:

sofware:
tv568mlc v3.0.3.8
tv1f568 v2.0

harware:
PCB: tv 1f568 v2.1 - 2008/10/13
cam: xhb 7676dn
ak 3631L014402 fso7e8
samsung 846/ K9GAG08U0M/ PCB0/ FCJ235BAC

and I didn't manage to do the way backup that you teaching

for my model other way does exist of extracting the firmware?

I hope he/she understands that translation.. kkkkkkkkkkkk

good-bye

try it again ..
you have the same player design ?

hold "+" and switch on the player at the same time (both buttons) !
if the player starts (welcome picture or so), leave both buttons ..
the player will freeze now on starting picture, no button will work.
connect usb from player to pc .. if first session, windows will ask you about driver.
.. now you can see 3 new drives/partitions on your workspace.
after save/backup this drives, disconnect usb line and make player reset (pinhole)

on next start the player works as before, but you have a secure backup on pc :)

the difference between my player and yours is little.

I did like you said:
I pressed the button "+" and at the same time I pushed the switch for "on", after that he/she usually appears the screen of welcomes written "X-sound! " (I think it is on that hour that the screen should freeze) but the player usually begins and later he/she appears the screen of connection usb... no this giving right.........

will it be that the player needs to be formatted? mine this filled of music

bye

<<<<Yfrog - pmpgm (image player)

none functions .. i dont know why with you not.
I expect in some days meet 2 new players and will test immediately on backup.

what happens then if you the middle button holds and at the same time usb connects?
of course must be switched off your player first.

if you have a samsung nand flash in your player, you can check the memorysize with the chipcode (open ur player) ..

SAMSUNG Semiconductor - Products - Flash - NAND Flash

example: 16gbit x8 = 16/8 = 2 gbyte with chipcode k9gag08u0m-pcb0 (only one flash chip)