Replacement wall charger (Glacier)
Has anyone found another wall charger that will replace the one that comes with the Glacier?
After reading about some people having their charger actually go up in smoke on them, I'd rather find a better one. |
Re: Replacement wall charger (Glacier)
Also, I want to use this in my truck via a FM transmitter (which I already have).
Is there any kind of charger that will plug into a standard 12v cigarette lighter? I've seen the holders/chargers for the IPods and I like that setup but I don't know if they plug in the same. |
Re: Replacement wall charger (Glacier)
This one sold on ebay says it includes a 48" USB to mini-USB cable, looks to me you could connect your glacier usb cable to it.
12Volt to usb charger There are a lot of standard usb chargers on ebay too. Quality questionable, so I bought a wall charger for the battery only, since I got 2 players both with extra batteries. I'd rather blow up a battery than a Glacier. A Nokia bl-4c charger on ebay, goes for $2 |
Re: Replacement wall charger (Glacier)
Quote:
But I just found this which looks like it will work. http://www.tigerdirect.com/applicati...Tab=1&NoMapp=0 This shows an output of DC 5 volt and 500 mA. Our factory charger shows an output of DC 5 volt and 200-300 mA. I wonder if the extra 200-300 mA is going to be too much? I'm also thinking about picking up a spare Nokia battery as well so I'll probably pickup one of those direct battery chargers as well. Thanks |
Re: Replacement wall charger (Glacier)
Quote:
|
Re: Replacement wall charger (Glacier)
Quote:
Any ideas about the 500 mA being too much? I understand that a typical computer USB port can send as much as 500 mA, so in theory it shouldn't be too much. Guess I might just give it a try. Thanks for your help. :) |
500mA should be alright, the player takes only what it needs, and you are right, the computer delivers the same. No worries there.
|
just spreading the word, the glacier and players that look exactly like it need to be charged by a 500ma wall charger and not the 200-300ma chargers people are getting.
If you use the 200-300ma charger you player will either take longer to charge and quickly degrade your battery or not charge your player at all. |
Quote:
If that's the case, why is Uxcell packaging the Glacier w/ the 200-300 mA charger? I bought mine directly from Uxcell and everything came in one box. |
The bl-4c battery charger I bought charges with 250mA max at 4.3 volts, it charges up to 2000mAh batteries. So I don't see why the usb wall chargers shouldn't work, provided they stay alive. But I would be happy with better info or insight on this, if available.
|
Re: Replacement wall charger (Glacier)
ZICK:
Quote:
http://images.google.com/imgres?imgu...%3Den%26sa%3DN Quote:
Anyway! I've seen other fm units on ebay that use this type of usb connection (cant remember which ones now). One end plugs into the 12v lighter, the other is meant to plug into the FM transmitter to power it without batteries. But I don't see why it couldn't plug into and power the Glacier, since it uses the same USB connection. n.b. A USB to mini-USB won't work. The Glacier is a "mini-mini USB", known as a Hirose USB type. Its not proprietary to the Glacier, its actually standard for a chipod. The wide connection you saw on the cable is normal, tha'ts a standard USB and that end goes into the 12v charger. Its the OTHER end you gotta worry about, and ensure its a Hirose USB. Yes, they do come with some FM transmitters, as I said. (Whether they can be purchased apart, I don't know, but you can get them with the FM trasmitter for as little as $6 or $7 so.....). If you get a spare batt, make sure its a genuine Nokia. |
Quote:
|
Quote:
|
Quote:
He's saying the 500mah are *better*, not that it cant be charged at 250-300mah. |
Quote:
I would just like to see where he is getting these facts from....are there proven tests to conclude using a lower mA charger causes the battery life to degrade? |
Re: Replacement wall charger (Glacier)
I have a Motorola RAZR V3c from Verizon which uses a mini-USB jack to charge with the same as the most of these Chinese MPX players. I've never tried using the Motorola wall charger on my player, but I imagine it would work.
|
Re: Replacement wall charger (Glacier)
Quote:
|
Quote:
|
Re: Replacement wall charger (Glacier)
Having designed circuits using Lithium-Ion cells and carefully studied the recommendations of their manufacturers (the info can be found on the web) I can say that there is not likely to be any difference between the charging of a device with, say, a, 200 mA charger and a 500 mA charger - other than, perhaps, how long it will take.
What it all boils down to is this: Did the maker of the device (the MP3/4 player, in this case) do what they were supposed to do when they designed it? It is worth remembering that these devices are intended to be charged from a computer's USB port. The USB specification allows for up to 500 mA to be supplied (at 5.0 volts, nominal) so if it allows you to charge from the computer, it is therefore allowed to charge from a 500 mA wall charger - even if they supplied a wall charger that is less than this. When you charge a lithium-ion battery, one of the important things to take into account is that the charge current cannot be too high. But, because these devices use a USB port (5 volts) for charging a lithium-ion battery (maximum of 4.2 volts) then they *must* have a chip that regulates voltage and limits current: If they didn't, you would have exploding batteries all over the place (charging a 4.2 lithium ion battery to 5 volts is somewhat lightly to result in gas buildup and cell rupture.) Since no-one has reported this happening (or lived to tell about it...) it is pretty safe to say that the manufacturers have taken this into account. The Lithium-Ion cell manufacturers *do* allow slower charging than their "maximum" rate - in fact, it may be somewhat beneficial to the cell as it can result it less heat being generated. Also, once a Lithium-Ion cell is "mostly" charged, it stops pulling as much current as it did when charging started, anyway. So, what harm is there in using a lower-current wall charger than originally supplied? As long as the voltage is the same, there are two things that might happen: - It may take a bit longer to charge. - If the charger is "timer" based (some will stop charging after a certain amount of time - even if the charging may have not completed) then it may stop before a full recharge is done. If this is the case, simply disconnect and reconnect. The circuit should prevent overcharge, regardless. Is there a harm to having a partially-charged battery? None at all, other than your player may not run for as long. In fact, Lithium-Ion cell manufacturers mention that the best longevity for a cell is when it is kept partially discharged as more internal degradation occurs in a fully-charged cell! (This is why cell phone batteries that are charged only when they start to run down last longer than ones that are put back on the charger every day.) Finally, I noticed that the charger supplied for my Rhodium is a 6 volt charger. Is this a problem? Probably not, since the charging circuit is regulating current and then stopping the charging of the cell when it reaches about 4.2 volts, anyway. Would it be safe to charge all USB-charging players with a 6 volt charger? Maybe, but if it originally came with a 5 volt charger, I'd be cautious if I were to try it with a 6 volt one - although it would *probably* be OK. ctmp3 |
Quote:
|
| All times are GMT -7. The time now is 12:34 pm. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2