i-Nickel Stainless 1.5"
 

I have this Mp4 Player i-Nickel Stainless (http://www.uxcell.com/uxcell/retail/...v0sil1024mp025)

I used this firmware:
http://www.uxcell.com/uxcell/retail/...ADS&action=faq
"i-Nickle" MP4 Player Firmware"

But now, my mp4 don´t start, only appear an white screen.
Someone help please :oops:

Re: i-Nickel Stainless 1.5"
 

Did you used the file LST-026A(XCELL).bin for the i-nickel.I tried it and work fine .you must turn off the player and wait 10 sec and turn back on.

i have this problem too, and using the LST-026A(XCELL).bin did not resolve the issue. is there maybe an older version?

Re: i-Nickel Stainless 1.5"
 

So... nobody fixed it yet?

bah, this is too much of a headache. i'm sending mine back, and hopefully uxcell (if they read this forum) will see fit to give me a refund.

Guys,

Just bear in mind that if you try to update the firmware on your player with an incompatible firmware - therefore resulting in a 'dead' player, then you have to understand that this isn't something that is covered under warranty.

Manufacturer's Warranty will cover for defective part or labour for their product. If it's a production fault or that a component isn't working or found defective, then that is something that is going to be covered under warranty.

However, flashing/updating your player with an incompatible firmware, is not going to be something that is warranty related.

I don't know what the full specs of UXcell's warranty, but I know that is the 'standard' warranty disclaimer that we get here in New Zealand.

So just be careful when flashing/updating your player with an incorrect firmware.