Lez, Make sure they do not try to upgrade the firmware when they get their players it will trash them.
Have a good one :)

Well that sucks cuase mine is dead and it's original version was 9.0.50, so I'm just gunna sit here and wait.

Full BIN File Repaired
 

I uploaded my bin file.
S1 MP3 Player
Wilson Co. Ltd
Ver 3.5.37
Board: WP-751CV1-STL 2005.12.2 (white letters off of pcb board)
Lisong LSD_801-06
2006/08/21
SDK 3.5.37
Firware: F644
1.8 Inch
http://cgi.ebay.com/ws/eBayISAPI.dll...m=270064803738

My contribution
 

I've just uploaded my player's firmware:

Sony mp4 player with 2GB and 2 inch color screen
Chipset ATJ2085
file id = 0x0FF0AA55
vendor id = 0x10D6
product id = 0x1101
version = 9.0.43
date = 04/29/2006
info = 'SDK-ITEM/ACTIONSGongee.ZH'
manufacturer = 'Wilson Co. Ltd.'
device name = 'S1 Mp3 Player'
usb attr = 'USB 2.0'
usb ident = '(HS) Flash Disk'
usb rev = '1.00'
rtc rate = 0x3B6
display contrast = 7
light time = 10
standby time = 30
sleep time = 0
language = english
replay mode = 0x00
online mode = 0x00
battery type = 1.5V alkaline
radio/fm support = yes

B600N2V3.0
07/24/2006

You can download it here: http://www.filefactory.com/file/749cf8/
Hope soon it will be available here at mympxplayer.org, after the admin approval.
Thanks for the great site!

I've uploaded a .zip file about 3 days ago with v9.0.43 firmware, but I don't see it in the download section. Should I upload it again?

Re: Please Upload your Players Firmware Today
 

I have uploaded my firmware twice and it has never shown up in the firmware download page...I have no idea how to get it uploaded. You can follow the procedure and nothing happens. Go to a third party and upload it there. Such as

http://uploaded.to/


Dave

Re: Please Upload your Players Firmware Today
 

My firmware is already available here at our site: http://www.mympxplayer.org/atj208590...-pm-df469.html
Hope it works for those in need.

Re: Please Upload your Players Firmware Today
 

click there---------->My Dump if you want it.. it is just the dump.bin file..... nothing else.

sorry it is all I have available.



1.5 screen

here is what I got from the bin thingy
$e
connect to device 'E:\'...
init device...
set device to f-mode...
get info from device...
ic version = 0x7676
storage info = 0x0602, 0x0001, 0x0000, 0x0000
device = 'LISONG MP3 Player'
manufacturer = 'Wilson Co. Ltd.'
bootflash type = 'F285'
brom version = 3.0.80
firmware version = 9.0.48
read boot record...
detect firmware size...
error: The system cannot read from the specified device.

warning: unknown firmware file
read flash...
error: The system cannot read from the specified device.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = D8F68C5793EF1D500E907C3B5530C7EB

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.48
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | 0E244EDF |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
| SYSINFO.BIN | | 192bytes | | | | | | 1051E35C |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

Re: Please Upload your Players Firmware Today
 

Hello Im new here but like would to upload my firmware where do send it or what. thanks
edit: I allready found out how thanks anyways.

Re: Please Upload your Players Firmware Today
 

:(
Hi I like the amv conversion tool so I also downloaded the codec, direct x9, media player update (now 11) etc. When I try to convert following the instructions, all i get is the status change from'Unconvert' to 'Err' any clues?
sorry I replied here but i just jined and could not find how to reply to the amv conversion toola rea.
Thanks

Re: Please Upload your Players Firmware Today
 

Been trying to get the firmware off my player useing S1fx but im not sure its working right and I wouldn't want to upload a bad firmware file so.

I ran the extract.exe file and i belive it did take the firmware off my player but also said a few errors such as unknown firmware file, repairing failed when i used repair.exe. But when i used extract.exe it did access my mp4 player and did put a dump.bin file in the folder of the program.

So I can upload that file if you want? It's size is 6,165KB.

davesnow , what version is your firmware?
The S1fwx tool currently only supports upto v9.0.43. Your player might be using the v9.0.48, v9.0.50 or v9.1.50. So while extracting, it displays all the error message.

I'm not sure if the dump file is complete, as some files might not be within it.

Re: Please Upload your Players Firmware Today
 

here is the info that is in the settings on my player.

Core: Act9x_0.49

Date: 2006-10-20

FW: SRX-1.5c-005

Date: 2006-11-10

davesnow, Unfortunatly the dump is most likely not viable. It looks like you may have a 9.0.49 version which s1fwx can not extract completely. Thankyou for taking the time to try though :)

Re: Please Upload your Players Firmware Today
 

No problem. When there is a tool i can use to extract the firmware from my player ill be sure to upload it. :)

tadad1,
I've uploaded my v9.0.43 fw twice but I don't see it in the downloads section, should I try it again??

hi dear friends, i came to this site newly , and i came to u asking a help ,

i have MP4 which i cant c any manufacturer name written on it!! it is only written on it MP4 DIGITAL PLAYER!

when i connect it ,my pc says rockUSB connected

i opened it and i saw the chops written on it ROCKCHIP RK 2606 a

[b]1-i tried to find firmware for it but nothing! and also i was in trouble coz many sites were totally in chinese!!

2-i tried to extract my original firmware by s1 tool but each time the pc says there is no USB connected although i connected it and the pc read it ![/b]

plz i know u r all here well experienced in this fieled , shall anyone tell me hown can i manage this? or even give me site for firmware of this type , or even give me program to transelate the chinese web pages :) :lol:

i attached some picture for my MP4 so one of u may know it

[img]http://img255.imageshack.us/img255/2125/snapzx9.th.png[/img]

and this is its interface from inside

[img]http://img223.imageshack.us/img223/8...e002ps9.th.jpg[/img]

thx alot in advance

ahmedfareed2000 , please see
http://www.mympxplayer.org/rockchip-...e-vp21226.html
http://www.mympxplayer.org/re-rockch...e-vp20976.html

Please don't re-post in multiple threads.

hi dear friends, i came to this site newly , and i came to u asking a help ,

i have MP4 which i cant c any manufacturer name written on it!! it is only written on it MP4 DIGITAL PLAYER!

when i connect it ,my pc says rockUSB connected

i opened it and i saw the chops written on it ROCKCHIP RK 2606 a

[b]1-i tried to find firmware for it but nothing! and also i was in trouble coz many sites were totally in chinese!!

2-i tried to extract my original firmware by s1 tool but each time the pc says there is no USB connected although i connected it and the pc read it ![/b]

plz i know u r all here well experienced in this fieled , shall anyone tell me hown can i manage this? or even give me site for firmware of this type , or even give me program to transelate the chinese web pages :) :lol:

i attached some picture for my MP4 so one of u may know it

[img]http://img255.imageshack.us/img255/2125/snapzx9.th.png[/img]

and this is its interface from inside

[img]http://img223.imageshack.us/img223/8...e002ps9.th.jpg[/img]

thx alot in advance

im sorry this is rerally not meant to send it multiple times . im really sorry this was problem with my net connections and the main company server , this is y i repeated it here ,

but i repeated it in other divisions of the forums,coz ur answer were just informing me that there is no known tool or firmware for this chipset so i wanted to ask other ppl in other forums devision

Re: Please Upload your Players Firmware Today
 

Re: Please Upload your Players Firmware Today
 

thank you

Re: Please Upload your Players Firmware Today
 

Hi guys,

I am a new user of this website and I first want to apologize if I am posting in a wrong thread. I have an mp3/wma/rec that I just recently bought, but I have a problem with it. When I try to play some songs, the player just restarts itself and then shuts down.

Can someone please help me and tell me what can I do? Should I install a firmware on it and where could I find it?

The player looks like this:

Again, sorry if I am posting in a wrong thread, and I would be really grateful if someone would be able to help me,

Thanks a lot,

Dreni

good idea tadad

CTW500 or ATJ209X-2.0" Glacier or Glacier alike-ACT2093
 

Hi Tadad,
please add this firmware to firmware or download section. here is the link : ACT2093_S75 for Glacier or Glacier alike 2.0" player
this firmware saved 3 people up to now.
1. follow dead player recovery guide and make your computer detect your player as ADFU device.
2. Run mp3 player tool (I used 4.0.9) and select firmware upgrade
3. Select this firmware and then click recovery button (not upgrade, if its name is upgrae, something is wrong with step 1 or 2)
4. if Upload is successful, after your computer disconnect the player, remove it from computer and turn it on.
5. if everythign up to here is okay, then player will start with chinese language. Goto settings menu of player and then select 3rd menu(Language) and then select 2nd(English).
6. Good Luck, All.

Re: Please Upload your Players Firmware Today
 

Dear Admin,
Please add the firmware whose link is given in my previous mail to download section. my step by step explanation and my player's photo may be helpful also. please add them ,too.
Thanks

Re: Please Upload your Players Firmware Today
 

HI friends,

I hav brought Chinese Mp4 Sony 1Gb with Spkr..

core: PMA300-010
Date 2006-03-15
Fw: SRX-3.5.37
Date 2006-03-24

Snapshot of My player===> http://mp4johnson.en.ec21.com/produc...product_nm=MP4

It was working fine until i Formatted it. So whenever i use to transfer file to the player it never use to play, always shows Format Error in the Screen or corrupted.. Therefore i thought to Upgrade the Firmware.
I got the Same FW-i.e SRX-3.5.37.. from [ http://www.s1mp3.org/en/downloads_fw.php#oled ]

But when i Upgraded it my screen went off , full Blank screen appeared, so from then now i'm not able to use my Mp4...

Therefore If any body got the solution for the same Plsssssss mail me..

Thanx in advance...

Re: Please Upload your Players Firmware Today
 

[web:28c312c5a3]http://rapidshare.com/files/26714091/dump.zip[/web:28c312c5a3]
v9.0.50
2007/03/05

I got the required Fw for my player .. thanks tadad1..

tadad how bout...the mpx firmware library???gotta a lot of them??

Hi guys,

I'm new and I found a problem doing what u ask in this topic. What can I do if s1fwx_version30 doesn't work and find an error??That's what happens:

"s1fwx v2.6 - copyright (c) 2005 wiRe (http://www.s1mp3.de/)
dump s1 firmware from flash into file...

-------------------------------------------------------------------------------
NO WARRANTY NOTE

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM CAUSE DAMAGE TO
ANY KIND OF DEVICE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.

IF YOU DONT AGREE TO THIS TERMS THEN PRESS ESC NOW!
-------------------------------------------------------------------------------

scan for devices...
detected drives: <h>

<a>..<z> select device
<.> scan for devices
<?> display help
<~> exit program

$h
connect to device 'H:\'...
init device...
set device to f-mode...
get info from device...
device = 'S1 Mp3 Player'
manufacturer = 'Wilson Co. Ltd.'
firmware type = 'F285'
firmware version = 9.0.50
read boot record...
detect firmware size...
error: Impossibile leggere dalla periferica specificata.

warning: unknown firmware file
read flash...
error: Impossibile leggere dalla periferica specificata.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = 74143EDF0FF02655EFD88DD44BC0D85C

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.50
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | 8F33B1A6 |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.
Premere un tasto per continuare . . ."


thanx a lot, if somebody could help me...

Moro, That is because your player has 9.0.50 version firmware, s1fwx does not work with any firmware above version 9.0.43.

For most people when extracting their firmware they do not know this information because they have had no need to open the player, I would not expect anyone to pull their player apart to check component serials just to upload their firmware.

Moro,

The s1fwx tool can't extract firmware version 9.0.50 at the moment. You have firmware version 9.0.50 unfortunately.

As soon as it's available, it will be on this site for everyone to download. So at the moment, we all just have to wait for wiRe to provide us with an upgraded version of the s1fwx tool.

i tried but after selecting extract and then typing in the drive, it scanned a bit and then it come up with error; can not read from specified device. so i obviously have the same issue as Moro

here is what is stored in my player

Firmware version.
LG MP3 PLAYER
SCC 91-002
CM60022
2007/01/12
ACT_V9.0.50

my ipod-nano's firmware_ "modified"
 

my fake ipod nano's features:
Apple-M V4 - 4gb
Samsung 631 k9wag08u1a pcb0 chipset
1.5 screen - 65k colour

Pictures of ipod nano:
http://img526.imageshack.us/img526/8...t310lt0.th.jpghttp://img176.imageshack.us/img176/6...t311ny7.th.jpghttp://img444.imageshack.us/img444/8...t312pb1.th.jpghttp://img514.imageshack.us/img514/5...t313zk3.th.jpg

ipod nano is like this anymore:
i upload image later


i modified it and it works well, i tried it. you can try and thanx to me :D






Click Here To Download _ 1.71mb

Firmware ATJ2093H
 

Ok... I bought a mp4 PLAYER from HONG KONG a few weeks ago.

At first it had no problems. Some weeks later when I tried to turn it on, it appeared a BLUE screen with a sand clock in it, but I couldn't use it.

As it didn't work I tried to upgrade the firmware, but now the screen is completely dark blue (my computer has always recognised it as an ADFU device).

Here are some characteristics of the PLAYER:

Large CHIPSET: SAMSUNG 652 K9G8G08UOM PCB0

Medium CHIPSET: ATJ2093H FC030FA 5C6

Small CHIPSET: SPT SP3767HN 06KS39

LCD Screen: P20061015 0644185969

Here you can see a mp4 PLAYER similar than mine:

http://www.fotozone.es/ficheros/2007...zone_17966.jpg

I hope someone can help me and tell me where to find the firmware I need. Thank you.

Re: Please Upload your Players Firmware Today
 

THOR1985 - What's the screen size?

The pic looks like my "full metal Platinum". You could look here for firmware:

http://www.uxcell.com/uxcell/retail/...ADS&action=faq

Although the file for the 1.5 size screen hasn't worked for me.

good luck.

Re: Please Upload your Players Firmware Today
 

I'd like to dump my player firmware(Nano Clone 2GB, Black, ATJ2093H, with firmware 9.0.48, Wilson Lisong), but how I can do it? I've seen a bunch of posts saying that it's impossible 'cause s1fwx still can't dump firmware on players like mine, due to some limitations.
And also I've seen some dumps of 9.0.48, 9.0.50 firmwares...
The question is: how'd you guys doing this?
Maybe there's another proggy for firmware dump?

I don't know how to get the firmware from my MP4 player
 

I really want to upload my firmware and maybe learn how to modify it, but the S1 software isn't working for me. My MP4 player came with a mini disk with a lot of programs, but no instructions or even descriptions about what the programs are.

Here is my MP4 player:

[img=left:a72f2ba967]http://www.houseofblaze.com/myspacephotos/watch.jpg[/img:a72f2ba967]

It's sold as a Raremono/Thanko 1.8" (actually 1.5") widescreen mp4 watch.

The chip is a Samsung K9LAG08(MLC). The firmware is 03.10.00, and my system settings say the chip version is 07.

Any idea what program I should be using to extract and/or modify this firmware?

Thank you.
- Blaze