Please Upload your Players Firmware Today

[Moro]

Hi guys,

I'm new and I found a problem doing what u ask in this topic. What can I do if s1fwx_version30 doesn't work and find an error??That's what happens:

"s1fwx v2.6 - copyright (c) 2005 wiRe (http://www.s1mp3.de/)
dump s1 firmware from flash into file...

-------------------------------------------------------------------------------
NO WARRANTY NOTE

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM CAUSE DAMAGE TO
ANY KIND OF DEVICE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.

IF YOU DONT AGREE TO THIS TERMS THEN PRESS ESC NOW!
-------------------------------------------------------------------------------

scan for devices...
detected drives: <h>

<a>..<z> select device
<.> scan for devices
<?> display help
<~> exit program

$h
connect to device 'H:\'...
init device...
set device to f-mode...
get info from device...
device = 'S1 Mp3 Player'
manufacturer = 'Wilson Co. Ltd.'
firmware type = 'F285'
firmware version = 9.0.50
read boot record...
detect firmware size...
error: Impossibile leggere dalla periferica specificata.

warning: unknown firmware file
read flash...
error: Impossibile leggere dalla periferica specificata.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = 74143EDF0FF02655EFD88DD44BC0D85C

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.50
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | 8F33B1A6 |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.
Premere un tasto per continuare . . ."


thanx a lot, if somebody could help me...

[tadad1]

Moro, That is because your player has 9.0.50 version firmware, s1fwx does not work with any firmware above version 9.0.43.

[tadad1]

Originally Posted by hugalactico";p=&quot

MESSAGE FOR THE ADMINISTRATOR, is very important to add the reference of LCD display, this is what marks the difference in many firmwares, for that reason sometimes work the MP4 but the screen is blue, remember to add the reference of the processor (2085, 20561h, 2091, etc) and the reference of the LCD example Giantplus xxxxx, the reference of the board is less important and the firmware reference is not important because when your player died you cant see the reference of your previous working firmware, thanks

For most people when extracting their firmware they do not know this information because they have had no need to open the player, I would not expect anyone to pull their player apart to check component serials just to upload their firmware.

[admin]

Moro,

The s1fwx tool can't extract firmware version 9.0.50 at the moment. You have firmware version 9.0.50 unfortunately.

As soon as it's available, it will be on this site for everyone to download. So at the moment, we all just have to wait for wiRe to provide us with an upgraded version of the s1fwx tool.

[monkeys are evil]

i tried but after selecting extract and then typing in the drive, it scanned a bit and then it come up with error; can not read from specified device. so i obviously have the same issue as Moro

here is what is stored in my player

Firmware version.
LG MP3 PLAYER
SCC 91-002
CM60022
2007/01/12
ACT_V9.0.50

[abisi]

my fake ipod nano's features:
Apple-M V4 - 4gb
Samsung 631 k9wag08u1a pcb0 chipset
1.5 screen - 65k colour

Pictures of ipod nano:


ipod nano is like this anymore:
i upload image later


i modified it and it works well, i tried it. you can try and thanx to me






Click Here To Download _ 1.71mb

[THOR1985]

Ok... I bought a mp4 PLAYER from HONG KONG a few weeks ago.

At first it had no problems. Some weeks later when I tried to turn it on, it appeared a BLUE screen with a sand clock in it, but I couldn't use it.

As it didn't work I tried to upgrade the firmware, but now the screen is completely dark blue (my computer has always recognised it as an ADFU device).

Here are some characteristics of the PLAYER:

Large CHIPSET: SAMSUNG 652 K9G8G08UOM PCB0

Medium CHIPSET: ATJ2093H FC030FA 5C6

Small CHIPSET: SPT SP3767HN 06KS39

LCD Screen: P20061015 0644185969

Here you can see a mp4 PLAYER similar than mine:

http://www.fotozone.es/ficheros/2007...zone_17966.jpg

I hope someone can help me and tell me where to find the firmware I need. Thank you.

[womblebongo]

THOR1985 - What's the screen size?

The pic looks like my "full metal Platinum". You could look here for firmware:

http://www.uxcell.com/uxcell/retail/...ADS&action=faq

Although the file for the 1.5 size screen hasn't worked for me.

good luck.

[VeRmuTT]

I'd like to dump my player firmware(Nano Clone 2GB, Black, ATJ2093H, with firmware 9.0.48, Wilson Lisong), but how I can do it? I've seen a bunch of posts saying that it's impossible 'cause s1fwx still can't dump firmware on players like mine, due to some limitations.
And also I've seen some dumps of 9.0.48, 9.0.50 firmwares...
The question is: how'd you guys doing this?
Maybe there's another proggy for firmware dump?

[Blaze]

I really want to upload my firmware and maybe learn how to modify it, but the S1 software isn't working for me. My MP4 player came with a mini disk with a lot of programs, but no instructions or even descriptions about what the programs are.

Here is my MP4 player:

[img=left:a72f2ba967]http://www.houseofblaze.com/myspacephotos/watch.jpg[/img:a72f2ba967]

It's sold as a Raremono/Thanko 1.8" (actually 1.5") widescreen mp4 watch.

The chip is a Samsung K9LAG08(MLC). The firmware is 03.10.00, and my system settings say the chip version is 07.

Any idea what program I should be using to extract and/or modify this firmware?

Thank you.
- Blaze