myMPX
Advertisement


Go Back MyMPx.org > MyMPx.org Forum > General Discussion

New nano clone with new firmware can't extract firm
Reply
Post New Thread
 
LinkBack Thread Tools
  #1 (permalink)  
Old 1st Nov 2006, 3:02 pm
New Member
 
Join Date: Nov 2006
Posts: 3
Default New nano clone with new firmware can't extract firm


hi,
Thanx for this forum, i've read many post since i've bought my mp4 player.
I've 3 differents type of mp4 player ( all must be 4gb):

-first type: 1gb memory with 3.5.35 firm, atj 2085

-second type : 2gb memory with 3.5.37 firm, atj 2085

-third type ( i've receive recently): 2gb memory chip atj 2091H
LSD_9101_11
2006-09-30
9.0.48
2005-01-09

i can't extract it with s1fwx:

"init device...
set device to f-mode...
get info from device...
ic version = 0x7676
storage info = 0x0602, 0x0001, 0x0000, 0x0000
device = 'LISONG MP3 Player'
manufacturer = 'Wilson Co. Ltd.'
bootflash type = 'F285'
brom version = 3.0.80
firmware version = 9.0.48
read boot record...
detect firmware size...
error: Lecture impossible sur le pÚriphÚrique spÚcifiÚ.

warning: unknown firmware file
read flash...
error: Lecture impossible sur le pÚriphÚrique spÚcifiÚ.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = 82BE493829CECC41EDD77935F2F6983D

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.48
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | D2D84CD9 |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
| SYSINFO.BIN | | 192bytes | | | | | | 22216B39 |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.

"
Could someone help me to extract / to mod this firm?

Thx

Click the image to open in full size.
Reply With Quote
  #2 (permalink)  
Old 1st Nov 2006, 4:06 pm
Senior Member
Valued Member
 
Join Date: May 2006
Posts: 3,752
Default

daytovince, At present it is not possible to make a backup of the 9.0.XX series firmware. s1fwx will need to be upgraded before this is possible. The only way you can mod the firmware is if you have a copy of the full version firmware.
__________________
Click the image to open in full size.

If you have been ripped off with a hacked player by a seller submit a report to www.ic3.gov
Reply With Quote
  #3 (permalink)  
Old 2nd Nov 2006, 3:48 am
New Member
 
Join Date: Nov 2006
Posts: 3
Default Re: New nano clone with new firmware can't extract firm

ok, i'm waiting for s1fwx upgrade.

Also have you seen on the motherboard the atj chip?
i'm still looking for information about the ATJ2091H but it seem that it doesn't exist.
Does this chip can manage more than 2gb? there is a second flash emplacement on the board. if i have a second flash ( same than the one actually on the board), i'll try some tests with two flash memory.

Sorry for my poor english.
Reply With Quote
  #4 (permalink)  
Old 2nd Nov 2006, 4:21 am
Senior Member
Valued Member
 
Join Date: May 2006
Posts: 3,752
Default

daytovince, I have seen players with dual chip boards before but never seen one that actually had 2 chips. I know that they can run 2 chips but I am not sure if you can go over 2GB total.

Here is a guide to adding an xtra chip to a s1mp3 player .

http://wiki.s1mp3.org/index.php/How_..._a_memory_chip
__________________
Click the image to open in full size.

If you have been ripped off with a hacked player by a seller submit a report to www.ic3.gov
Reply With Quote
Reply

Sponsored Links



Similar Threads
Thread Thread Starter Forum Replies Last Post
ipod clone ak2025 9.55.54 firm ..dos?? bangs Support and How To 0 8th Jan 2010 10:26 am
i need firm ware for i pod nano clone anniem Support and How To 2 17th Feb 2008 3:59 am
extract firm ware? Camaro General Discussion - Uxcell.com 1 20th Feb 2007 5:25 pm
need nano clone firmware martin0709 Support and How To 1 1st Feb 2007 4:31 am
What firmware do you use on your Nano Clone dansvob General Discussion 2 19th Jul 2006 12:59 am


All times are GMT -7. The time now is 12:32 pm.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2
Back to Top

Designed by indiqo.media