Re: replace battery
 

I see that the battery that you all have bought have a white, red and black wires. On our MP4 players, there are only red and black wires. What did you do with the white wire on your new battery? Did you just cut the connector off and solder the red and black wire to the chipod and leave out the white wire?


Thanks

On the ipod mini I had it was Black, Grey and White.
So I just put a voltmeter on them to check.
Grey and White were both positive at 3.8v and Black was negative.
So I just cut the Grey one off and soldered in the White and Black wires.
Its always safer to check with a meter before you solder them in.

Re: replace battery
 

Hi

I have a fake ipod with a battery that is 4cm x 2cm x 4mm deep. I can't seem to find any battery that are the same size or smaller. Can anyone please help me? also how did you manage to find a similar sized battery.

Thanks

Ipod shuffle battery should fit:-
http://cgi.ebay.co.uk/ipod-shuffle-a...QQcmdZViewItem

http://cgi.ebay.co.uk/APPLE-iPod-SHU...QQcmdZViewItem

It's 30 x 19 x 4mm at 300mAh

I just searched "Ipod Batttery" on EBay.

Re: replace battery
 

hmm only 300mAH? my current fake ipod battery is 260mAH, so theres not much more :\ Are there any bigger capacity ones?

Thanks for your help

for a battery that size, you are not likely to find much more.. Sorry.

Here is a E Bay link for replacement battery for the Chinese Ipod Nano Fake.

These batteries are rated at 250 Milliamps


http://cgi.ebay.co.uk/Replacement-Ba...QQcmdZViewItem


And another link!


http://cgi.ebay.co.uk/Replacement-Ba...QQcmdZViewItem


I have order myself a replacement battery from the link directly above from here, price to the UK £2.49 which don't seem too bad from this E Bay seller actionace007 however it seems he has something to do with Uxcell.com

Re: replace battery
 

i am able to find batterys that dont have wires coming out from the battery that fit my size, they are 750mAH. The only problem is that they have no wires coming out of them. Instead they have a positve and negative touchpad on the battery itself. I was wondering if its safe to solder wires onto the positve and negative point on the battery then solder the wires onto my fake ipod?

Post a link here for the battery you mention please?

And Yes I can't see why you can't solder that battery you mention, if it has no wires.

But check with a meter first before you connect

Re: replace battery
 

Batteries like these:

[web:24ad69c63f]http://cgi.ebay.com.au/Casio-NP-20-Battery-Pack-3-6v-500mAh-Li-ion-FAST-DEL_W0QQitemZ120148122492QQihZ002QQcategoryZ64347Q QssPageNameZWDVWQQrdZ1QQcmdZViewItem[/web:24ad69c63f]

which dont have wires, but have positive negative terminals on them. Is it safe to solder wires onto the terminals on the battery? or will it kill the battery? Also will a 3.6volt battery work with our fake ipods?