myMPX
Advertisement


Go Back MyMPx.org > MyMPx.org Forum > Dead Players

hanging e-reader (rk2738 msc dead)
Reply
Post New Thread
 
Thread Tools
  #1  
Old 22nd Nov 2012, 4:22 am
duikkie duikkie is offline
New Member
 
Join Date: Nov 2012
Posts: 3
Default hanging e-reader (rk2738 msc dead)


hi ,

don't shoot me for my bad english !!!

i have a hanging e-reader nothing is working ( the buttons )

with usb cable i see to drives poping up

i have read all ( i think ) threads about it

problems with the solution is :

with pin 29 and 30 connected ( soldering , therfore good connection)
the e-reader gives a usb device !
because how must the pc know about a RK28USB ?? driver
i don't have it on the pc ( windows xpsp2 32 bit)

so how can i alterated the ini files ??

in RKupgrade v1.27 i can see the ini file and change it in 0x2207 and 0x273a

the problem stil there where is the RK28USB driver ???

thus without connection there is a poping 2 drives
with connection 29pin+30pin there is USB DEVICE ? or ! , no program for this device.

without drivers the RK28upgrade 1.27 will never work
Reply With Quote
  #2  
Old 25th Nov 2012, 11:04 pm
WIZARD's Avatar
WIZARD WIZARD is offline
Senior Member
MPx Junkie
 
Join Date: Mar 2008
Posts: 300
Wink

Are you sure that you need RK28 driver? In the thread title, you specified "RK2738" - RK27 processor family, not RK28.

Okay, I give it to you:

Download EBOOK_FM5807p_V2.rar

You can find RK28 Windows XP driver in the following folder:

Code:
EBOOK_FM5807p_V2 --> Toolv1.27-2738 -> RK28 --> Driver --> x86 --> xp
It should work, but I cannot test it. So, if it doesn't, just tell me and I try to find another.

By the way, I recommend you to upgrade from SP2 to SP3:

http://www.microsoft.com/en-us/downl...ils.aspx?id=24
__________________
Heroes of Might and Magic V - The Best Game In The World !
Try to play !

Last edited by WIZARD; 25th Nov 2012 at 11:08 pm.
Reply With Quote
  #3  
Old 25th Nov 2012, 11:43 pm
duikkie duikkie is offline
New Member
 
Join Date: Nov 2012
Posts: 3
Default

thank for the files

i have also sp3 for windows

but i found out what the problem is with my e-reader

its the keyboard !!!

the keyboard mat is loose from the plastic
therefor more key's are in contact with the
mainboard of the reader.

also the keyboard is to close to the keyboard mat ??
searching now for plastic o rings between
MB and the plastic outside
the srews then can not put the keyboard mat
against the mainboard

sometimes the problem of hanging is not
the frameware but the people whom
pressing key's to hard every time in years

maybe other people have the same problem
check the working e-reader loose from all the plastic
Reply With Quote
  #4  
Old 26th Nov 2012, 1:29 pm
WIZARD's Avatar
WIZARD WIZARD is offline
Senior Member
MPx Junkie
 
Join Date: Mar 2008
Posts: 300
Default

Thanks for sharing your experience. I am really glad that you fixed your e-reader
__________________
Heroes of Might and Magic V - The Best Game In The World !
Try to play !
Reply With Quote
  #5  
Old 26th Nov 2012, 11:38 pm
duikkie duikkie is offline
New Member
 
Join Date: Nov 2012
Posts: 3
Default

no thanks

it's working

the only trouble is the speaker ;(
because they are connected with thin wires
the speaker is dead.
because a have opened the e-reader to much.

i did put an other speaker from a old telephone
in the e-reader , and there was sound !!!

the o ring where to big 0.5 mm
therefor they keymat a little bit inside know
if you push a button
and the shell outside from plastic is just fitting
no space left.

main think is it's working now !!!
Reply With Quote
Reply

Sponsored Links

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rk2738 Naxionman Firmware 35 15th Apr 2013 12:42 am
Dead Ebook reader rockchip Atreyu Dead Players 4 22nd Nov 2011 2:19 pm
Ak1025 hanging on 'loading' djdeedh Dead Players 0 30th Mar 2008 7:46 am
From hanging problems to blue screen zapwing Support and How To 4 4th Sep 2007 1:39 am
_Generic MSC Recovery USB Device imp-97-no-existe Dead Players 0 1st Mar 2007 2:30 pm


All times are GMT -7. The time now is 9:38 am.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Back to Top

Designed by indiqo.media