Which firmware

[Schiwi]

I have following player

file id = 0x0FF0AA55
vendor id = 0x10D6
product id = 0x1100
version = 3.5.35
date = 12/16/2005
info = 'SDK-ITEM/ACTION
manufacturer = 'Wilson
device name = 'S1 Mp3 P
usb attr = 'GENERIC'
usb ident = 'USB DISK D
usb rev = '1.00'
rtc rate = 0x3B6
display contrast = 11
light time = 0
standby time = 0
sleep time = 0
language = simple chine
replay mode = 0x00
online mode = 0x00
battery type = 1.5V alk
radio/fm support = yes

which is the correct 3.5.37 firmware for my device???

I want to use filebrowser. I read in forum that i can use it with .37 fw.
and of course switching to next track is slow!

Thanks for your help and sorry if my english is not so good

[lattesurf]

Schiwi , currently your player is working, so i wouldn't encourage you to try any firmware updates. Likely chance of killing your player while doing so.

However, if you are adventurous and want to try to enable the file-browsing. Extract your firmware and keep it safely for backup first. Next, read up on Rolleyflex's thread on merging firmware Here.

But bear in mind that if you accidentally kill your player, there is still a slight chance that you might not find the right Full firmware to bring your player to ADFU state.

Good Luck.

[Schiwi]

Originally Posted by lattesurf";p=&quot

Schiwi , currently your player is working, so i wouldn't encourage you to try any firmware updates. Likely chance of killing your player while doing so.

However, if you are adventurous and want to try to enable the file-browsing. Extract your firmware and keep it safely for backup first. Next, read up on Rolleyflex's thread on merging firmware Here.

But bear in mind that if you accidentally kill your player, there is still a slight chance that you might not find the right Full firmware to bring your player to ADFU state.

Good Luck.

thank you for your anserw but i think it does not help me. rolleyflex seems to have another player. I read mandy threats in this forum but i did not find a player like mine.

This is exact info from the player

2005/12/16
3.5.35
2006/02/10
jtymd046v4

[Schiwi]

nobody who can help me :cry:

[admin]

Schiwi,

I wish I could, but as most of the firmware are not labelled all the same way, I can't say "this is the exact firmware for your player and it will work definately".

Unfortunately it's a 'trial and error' process until you find the correct one. There is no real formula which will give you the correct firmware straight away.

Remember though that you still risk the possiblity of having a 'dead player' in the process. If your player is working, I suggest just leave it as is unless you are prepared to spend abit of time recovering a dead player if you use someone else's firmware.

Hope that's helpful.