myMPX
Advertisement


Go Back MyMPx.org > MyMPx.org Forum > Support and How To

shwy mp4 1gb firmware
Reply
Post New Thread
 
LinkBack Thread Tools
  #1 (permalink)  
Old 16th Nov 2006, 10:18 am
New Member
 
Join Date: Nov 2006
Posts: 1
Default shwy mp4 1gb firmware


Hello

I have a MP4 1gb, SHWY brand.

I Tried to downlad the firmware, but always have an error.

What i´m doing wrong?

thanks


core: act9x_0.43
date: 2006-04-25

fw:srx-1.5c-001
dare:2006-10-10

s1fwx v3.0 - copyright (c) 2005 wiRe (http://www.s1mp3.de/)
dump s1 firmware from flash into file...

-------------------------------------------------------------------------------
NO WARRANTY NOTE

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM CAUSE DAMAGE TO
ANY KIND OF DEVICE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.

IF YOU DONT AGREE TO THIS TERMS THEN PRESS ESC NOW!
-------------------------------------------------------------------------------

scan for devices...
detected drives: <f>

<a>..<z> select device
<.> scan for devices
<?> display help
<~> exit program

$f
connect to device 'F:\'...
init device...
set device to f-mode...
get info from device...
ic version = 0x0000
storage info = 0x0602, 0x0001, 0x0000, 0x0000
device = 'S1 Mp3 Player'
manufacturer = 'Wilson Co. Ltd.'
bootflash type = 'F285'
brom version = 3.0.80
firmware version = 9.0.48
read boot record...
detect firmware size...
error: O sistema nÒo consegue ler do dispositivo especificado.

warning: unknown firmware file
read flash...
error: O sistema nÒo consegue ler do dispositivo especificado.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = F6F2CD6C4B5C2AA73909D71C1D4BDF5F

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.48
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | 171CA255 |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
| SYSINFO.BIN | | 192bytes | | | | | | 10CF8850 |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.
Prima qualquer tecla para continuar . . .
Reply With Quote
  #2 (permalink)  
Old 16th Nov 2006, 1:58 pm
Senior Member
Valued Member
 
Join Date: May 2006
Posts: 3,752
Default

zepreira, At the moment there is no way to make a backup of the 9.0.XX series firmware. The s1fwx tool will need to be updated before this can happen.
__________________
Click the image to open in full size.

If you have been ripped off with a hacked player by a seller submit a report to www.ic3.gov
Reply With Quote
Reply

Sponsored Links




All times are GMT -7. The time now is 6:55 am.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2
Back to Top

Designed by indiqo.media