myMPX
Advertisement


Go Back MyMPx.org > MyMPx.org Forum > Support and How To

How To: Removing Memory Hack
Reply
Post New Thread
 
LinkBack Thread Tools
  #61 (permalink)  
Old 3rd Oct 2009, 6:55 am
New Member
 
Join Date: Oct 2009
Posts: 9
Default


The tool says that it couldn't see the disk while plugged in, I even able to format and put songs in it. What's the problem?
Reply With Quote
  #62 (permalink)  
Old 3rd Oct 2009, 8:27 am
New Member
 
Join Date: Sep 2009
Location: The Northeast Kingdom
Posts: 2
Default

The problem is that I cannot use the tool to remove the memory hack. As far as the tool software can tell, there is nothing plugged in that it can access.
Reply With Quote
  #63 (permalink)  
Old 8th Oct 2009, 6:53 am
New Member
 
Join Date: Oct 2009
Posts: 9
Default

Quote:
Originally Posted by shafted_the_west View Post
The problem is that I cannot use the tool to remove the memory hack. As far as the tool software can tell, there is nothing plugged in that it can access.
This is the same problem as mine! Help me guys, please!
Reply With Quote
  #64 (permalink)  
Old 21st Oct 2009, 4:44 pm
New Member
 
Join Date: Oct 2009
Posts: 1
Unhappy My 8GB errors at 1.6GB and G not F(SD)shows as my main. Utilities freaks out !

Bought an 8GB but can load only 1.6 GB before errors start to occur. Also my G: drive is showing as my main and F: drive shows as the SD slot, the utilities program will not let me move the slider on the partition and encrypt tab. It also give me a "can not detect device" (possibly looking for F before going to G: drive. It also run really slow and slows down my PC. Is this a new tactic to make utilities unable to fix and show true drive volume. Running H2testw to see what it comes up with. I like the players software(sliding menus) i wish i could fix this thing. Any suggestions.............
Reply With Quote
  #65 (permalink)  
Old 23rd Oct 2009, 10:32 am
New Member
 
Join Date: Oct 2009
Posts: 3
Default

Will this work with my player? Newbie to this so all help will be muchly appreciated. It says its 32 g but I keep getting a file format error when I try to put any music or video on it. Its supposed to be 32 g but only 3g of memory is used. Help!
Attached Images
File Type: jpg mp48.jpg (20.6 KB, 12 views)
Reply With Quote
  #66 (permalink)  
Old 24th Oct 2009, 6:26 am
New Member
 
Join Date: Oct 2009
Posts: 1
Default

What happens if the disk tool doesn't recognise the USB drive despite the fact that vista O/S does? I tried a few versions of disk tool and it makes no difference, A low format of the drive doesn't help either. Any other suggestions for alternate ways to remoe the hack?

a
Reply With Quote
  #67 (permalink)  
Old 6th Nov 2009, 2:59 am
New Member
 
Join Date: Oct 2009
Posts: 1
Default Low level format

I got my 2 "Onda-like 32GB touchscreen" devices reset to the original 4GB working fine after formatting the devices using this tool:

HDDGURU: HDD Low Level Format Tool

It's a freeware low level formatting tool and as soon as I started it, automatically recognised the real size of the drive and formatted it to that size. I haven't had any further issues with them for a couple of days.
Reply With Quote
Sponsored Links
  #68 (permalink)  
Old 19th Nov 2009, 8:34 am
New Member
 
Join Date: Nov 2009
Posts: 4
Default

I found another tool to quickly and easily remove the memory hack:

Fake MP Player and How To Fix It – Niko’s Repair Of eBay Seller lovehuangfeifei2008 Fake MP Player FixFakeFlash Inspectortech

I followed the instrux. at the link, using a freeware tool called Check Flash 1.10. Just follow the directions carefully and don't click anything unless you are sure. I came very close to wiping out the Hard Drive of my PC by not paying attention. Lucky for me I stopped just in time.
Reply With Quote
  #69 (permalink)  
Old 30th Nov 2009, 2:26 am
New Member
 
Join Date: Nov 2009
Posts: 14
Default

Quote:
Originally Posted by ftanl View Post
Check your firmware.. if i's 9.5.54 stay away from this Guide.. it will destroy any & all memory..
My firmware version is LISONG DESIGN 9.5.54.
After all steps of this guide was done I received the player, which didn't see internal memory. It show 00Mb in the memory properties. I tried to format it using Windows, but I didn't achieve success
But I found solution:
I found solution:
First of all low format should be performed using HDD Low Level Format Tool, after that I did "Full format" using mp3 Player Disk Tool. As a result I received working player with 4Gb of memory (instead of hacked 8Gb).
But real size of my memory only 2Gb
So my player is alive now, but before it showed 8Gb, now it shows 4Gb and I'd like it show 2Gb
Reply With Quote
  #70 (permalink)  
Old 30th Nov 2009, 5:02 pm
New Member
 
Join Date: Nov 2009
Posts: 10
Default

Hello, I tried to install mp3 utilities but I cannot install the mp3 player disk because of some missing file. Could someone help?
Reply With Quote
Reply

Sponsored Links



Similar Threads
Thread Thread Starter Forum Replies Last Post
Help removing memory hack on rizone "16" gb mp4 player bennyfy Support and How To 0 31st Jan 2010 6:24 am
16 GB Mp2/mp4 fake ipod, need lots of help in removing memory icekitsune Support and How To 6 4th Dec 2009 8:16 pm
What I have after removing the hacked memory size? nty General Discussion 0 1st Dec 2009 3:29 pm
Help with memory hack marek56 Support and How To 0 11th Sep 2008 9:40 pm
Problem with " Removing Memory Hack" WordsVsPain Support and How To 3 10th Jul 2008 1:29 am


All times are GMT -7. The time now is 3:27 pm.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2
Back to Top

Designed by indiqo.media