[solved] plays mp3s for 10 seconds, can't edit dump.bin

[TruXter]

bought a 1 gig mp3/mp4 player Images Here !.

no sound in left ear bud (sound worked for two days)
plays mp3s for 10 seconds exactly
can't edit dump.bin (s1res.exe does not recognize it)


this was inside .
KW

zhou yuen 042035SP 3.75 250mah


643
k968gD8jOm
pcbu


feik97pa





here is what I got from the bin thingy
$e
connect to device 'E:\'...
init device...
set device to f-mode...
get info from device...
ic version = 0x7676
storage info = 0x0602, 0x0001, 0x0000, 0x0000
device = 'LISONG MP3 Player'
manufacturer = 'Wilson Co. Ltd.'
bootflash type = 'F285'
brom version = 3.0.80
firmware version = 9.0.48
read boot record...
detect firmware size...
error: The system cannot read from the specified device.

warning: unknown firmware file
read flash...
error: The system cannot read from the specified device.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = D8F68C5793EF1D500E907C3B5530C7EB

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.48
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | 0E244EDF |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
| SYSINFO.BIN | | 192bytes | | | | | | 1051E35C |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.
Press any key to continue . . .

[lattesurf]

TruXter , for the 10 sec playback problem, set the Repeat Mode to Normal, rather than Intro.

For the sound problem, it is likely a broken solder for the contact point. Try another pair of earphones to confirm this.
If it still occurs, then you will need to open up the player and resolder the 5 contact points that holds the audio socket to the board.

As for editting in S1res, your firmware is a version 9.0.48, which currently the S1res does not support. We are still waiting for future releases to be able to support it.
A note of advice, don't try flashing another firmware into your player. It would be almost impossible to recover your player if it ends up dead.

[TruXter]

Originally Posted by lattesurf";p=&quot

TruXter , for the 10 sec playback problem, set the Repeat Mode to Normal, rather than Intro.

For the sound problem, it is likely a broken solder for the contact point. Try another pair of earphones to confirm this.
If it still occurs, then you will need to open up the player and resolder the 5 contact points that holds the audio socket to the board.

As for editting in S1res, your firmware is a version 9.0.48, which currently the S1res does not support. We are still waiting for future releases to be able to support it.
A note of advice, don't try flashing another firmware into your player. It would be almost impossible to recover your player if it ends up dead.

dude TYVFM! Man.. you are very helpfull.. if you are a mod... lock and delete this.. I hate being the newbie and looking it.. ... but once again.. I thank you... with as much greatfullness I can summons. thank you.




it is the head phone...

and I can't mod anything?.. nm i guess you answered that when you said there was no tools to do so with.

[botti]

TruXter can you send me your .bin?
bozzolino1@vodafone.it
thanks

[TruXter]

Originally Posted by botti";p=&quot

TruXter can you send me your .bin?
bozzolino1@vodafone.it
thanks

from what I understand, with the current tools .. I will not be able to extract the bin properly.

I am scared that if your eyepawed isn't broke.... it will be .and I do not want it to be my fault.


but if your's is dead and you are looking for any help..


ok.