cant dump firmware of 1.5 Nano-Clone s1 mp3 player wilson co

[chada]

I cant dump my mp4 players firmware. Please help.

I am using the latest version of s1fwx (version v3.1).

This is what I get when i try to dump firmware.



dump s1 firmware from flash into file...

-------------------------------------------------------------------------------
NO WARRANTY NOTE

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM CAUSE DAMAGE TO
ANY KIND OF DEVICE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.

IF YOU DONT AGREE TO THIS TERMS THEN PRESS ESC NOW!
-------------------------------------------------------------------------------

scan for devices...
detected drives: <e>

<a>..<z> select device
<.> scan for devices
<?> display help
<~> exit program

$e
connect to device 'E:\'...
init device...
set device to f-mode...
get info from device...
ic version = 0x0000
storage info = 0x0602, 0x0001, 0x0000, 0x0000
device = 'S1 Mp3 Player'
manufacturer = 'Wilson Co. Ltd.'
bootflash type = 'F285'
brom version = 3.0.80
firmware version = 9.0.43
read boot record...
detect firmware size...
error: The system cannot read from the specified device :?:

warning: unknown firmware file :?:
read flash...
error: The system cannot read from the specified device :?:

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = 793AF54C8CD7053AE62CDA0D6555E91F

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.43
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | E1895929 |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
| SYSINFO.BIN | | 192bytes | | | | | | A39D8231 |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.


Altough it says success, the dump.bin it produces cannot be repaired and cannot be read in s1res.

please help

Chada

[tadad1]

chada,
You should not have a problem with 9.0.43 if you are using s1fwx 3.1.
The only thing that I see different is you have strange bootflash information "bootflash type = 'F285' " with 9.0.XX series firmware it usually reads "bootflash type = 'F648' "

[chada]

Originally Posted by tadad1";p=&quot

chada,
You should not have a problem with 9.0.43 if you are using s1fwx 3.1.
The only thing that I see different is you have strange bootflash information "bootflash type = 'F285' " with 9.0.XX series firmware it usually reads "bootflash type = 'F648' "

Any idea what i can do?? Please help.

Chada

[tadad1]

Chada, I am not sure that there is a solution. What type of player is it?

[chada]

Originally Posted by tadad1

Chada, I am not sure that there is a solution. What type of player is it?

yes, its a 1.5" Nano clone that I have discovered is hacked. I bought it off ebay and a loser called e-britain.