myMPX
Advertisement


Go Back MyMPx.org > MyMPx.org Forum > Support and How To

Trying to modified 9.0.50 and unable to do so
Reply
Post New Thread
 
LinkBack Thread Tools
  #1 (permalink)  
Old 3rd Apr 2007, 7:34 am
New Member
 
Join Date: Apr 2007
Posts: 3
Default Trying to modified 9.0.50 and unable to do so


NEED HELP!!! trying to modified 9.0.50 and unable to do so
tried any 9.0.5 versions and non working on my player.
also my dumb dont work on the program: s1res getting the usuall error:
"an attempt was made to load a program with an incorrect format"
if some one have 9.0.50 versions of dumbs please tell me where i can find more (not on the download zone in this forum, i tested all and all of then getting me white screen only).
thanks!
my dumb url: www.remote-hobbies.com/dumb.bin
Reply With Quote
  #2 (permalink)  
Old 3rd Apr 2007, 8:34 am
Senior Member
Valued Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 2,962
Default

rapghsi , are you having any problems with your player? If not, i'll suggest not doing anything to the firmware, as you would most like brick it by flashing in someone else's firmware.

S1fwx currently only supports upto v9.0.43, so your v9.0.50 would be unable to be extracted as yet. That is why your dump file could not be opened by the S1res software.
__________________
Why are clones called MP4 Players, when they don`t play .MP4 at all?
It`s like an MP3 Player which plays Music CDs only.


T39 doesn''t sound as good as my T29
Reply With Quote
  #3 (permalink)  
Old 3rd Apr 2007, 8:39 am
New Member
 
Join Date: Apr 2007
Posts: 3
Default

The player is ok.
but after i have took out the firmware out of the player and put it back, the loading was much lower.
evrithing was pretly much the same, i think that my firmware is the only one that work with 9.0.50 so anyone having problems with his firmware on virsion: 9.0.5 coult try use it.
when oyu think they will update it?
Reply With Quote
  #4 (permalink)  
Old 5th Apr 2007, 12:50 am
New Member
 
Join Date: Apr 2007
Posts: 3
Default Re: NEED HELP!!! trying to modified 9.0.50 and unable to do

Is there any program that can make full firmware bin files work on s1res?
cause i have a working full firmware, that i can upload to my player, but its not opening on s1res!
thanks all!
my firmware date: 9.0.50
Reply With Quote
  #5 (permalink)  
Old 5th Apr 2007, 1:16 am
Senior Member
MPx Junkie
 
Join Date: Feb 2007
Posts: 391
Default

If your firmware is not opening in s1res then it is incomplete and not a full firmware file.
__________________
Queensland - The Triangular State
[hr:43af44b395]
It is the beginning of wisdom to be able to say *I dont know!*
Reply With Quote
  #6 (permalink)  
Old 5th Apr 2007, 2:52 am
Administrator
Admin
 
Join Date: Jan 2006
Posts: 3,512
Default

As far as I can recall, I believe the s1res tool CAN'T detect 9.0.50 firmware at the moment.

Hoepfully the upcoming s1res versions will be able to do this soon.
__________________
Thanks,
Binh (admin)

Win: A 4GB 2.6" TFT Touch MP4 Player from Tinydeal! Go --> here

5% Discount Coupon from Tinydeal here.

Reply With Quote
  #7 (permalink)  
Old 5th Apr 2007, 3:16 pm
New Member
 
Join Date: Apr 2007
Posts: 12
Default Re: Trying to modified 9.0.50 and unable to do so

s1fwx v2.6 - copyright (c) 2005 wiRe (http://www.s1mp3.de/)
dump s1 firmware from flash into file...

-------------------------------------------------------------------------------
NO WARRANTY NOTE

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM CAUSE DAMAGE TO
ANY KIND OF DEVICE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.

IF YOU DONT AGREE TO THIS TERMS THEN PRESS ESC NOW!
-------------------------------------------------------------------------------

scan for devices...
detected drives: <g>

<a>..<z> select device
<.> scan for devices
<?> display help
<~> exit program

$g
connect to device 'G:\'...
init device...
set device to f-mode...
get info from device...
device = 'LISONG MP3 Player'
manufacturer = 'Wilson Co. Ltd.'
firmware type = 'F285'
firmware version = 9.0.50
read boot record...
detect firmware size...
error: The system cannot read from the specified device.

warning: unknown firmware file
read flash...
error: The system cannot read from the specified device.

write to file 'dump.bin'...

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin'
filetype = afi
md5 = 64DDD9ACAE7BDBAE538C8C51BF3C1C9D

---[ info:afi ]----------------------------------------------------------------
file id = 'AFI '
vendor id = 0x6977
product id = 0x6552
version = 9.0.50
date = 00/00/0000

+---filename---+ +---size---+ +-type-+ +---+ +--chksum--+
| BRECF285.BIN | | 16kb | | F285 | | B | | 0CF057B2 |
| FWIMAGE.FW | | 6mb | | | | I | | 383F104C |
+--------------+ +----------+ +------+ +---+ +----------+

---[ info ]--------------------------------------------------------------------
filename = 'dump.bin.FWIMAGE.FW'
filetype = unknown
md5 = DA6A0D097E307AC52ED9B4AD551801FC

disconnect from device...
success.
Press any key to continue . . .




What does that mean? I have 9.0.50 firmware?
Reply With Quote
Sponsored Links
  #8 (permalink)  
Old 5th Apr 2007, 7:03 pm
Senior Member
Valued Member
 
Join Date: Sep 2006
Location: Singapore
Posts: 2,962
Default

SupraTT , if you look at the middle section under ---[ info ]----, that is your current firmware in your player, which is v9.0.50.
__________________
Why are clones called MP4 Players, when they don`t play .MP4 at all?
It`s like an MP3 Player which plays Music CDs only.


T39 doesn''t sound as good as my T29
Reply With Quote
  #9 (permalink)  
Old 9th Apr 2007, 2:59 am
New Member
 
Join Date: Apr 2007
Posts: 12
Default

Quote:
Originally Posted by lattesurf";p=&quot View Post
SupraTT , if you look at the middle section under ---[ info ]----, that is your current firmware in your player, which is v9.0.50.
Cool. I got the much out of it but couldn't make heads or tails out of anything else. Also, from what I've gathers 9.0.50 is not modable at this time.
Reply With Quote
Reply

Sponsored Links



Similar Threads
Thread Thread Starter Forum Replies Last Post
Theme modified bu have glitch? blakrajder Mods and Themes 2 13th Oct 2007 2:53 am
Modified AVIconverter for Rockchip, optimised for PAL Grindathotte Video related 4 23rd Apr 2007 1:46 am
Glacier Modified Firmware Thanatos General Discussion - Uxcell.com 1 26th Mar 2007 1:52 pm
i have modified the fw, but the texts are cutted! Bopo Support and How To 10 30th Jul 2006 7:27 pm
[Solved] modified my firmware and killed the player moh3en Dead Players 2 1st Jul 2006 6:51 pm


All times are GMT -7. The time now is 9:47 am.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2
Back to Top

Designed by indiqo.media