Hello
severals months ago i posted a problem whit my MP4 iPOD Clone ANYKA Chip.
If this looks like your player, well
i have founded. a solution
I extracted the firmware using nothing but my hands.
well lets go to repair your player.
VERY IMPORTANT: some features, like camera, radio will be or not disabled,
but its better than nothing.
this is what you need in order to repair, to extract see the note below:
* USB cable (named "USB Line" too).
* full charge batery of the player (minimum 10 mins. conected to the power supply )
*
Download this firmware.
and be prepared to do it.
letīs start!
Notice: first your player must be "turn OFF".
OK.
1. Enter the "BIOS"
Firsts Hold MENU and connect the USB cable to the computer and the player.
then release MENU and press "PLAY" quickly.
If you do it well you should see this.
ok then press "REWIND"(left <<|) and "MENU" and "|>>"(right).
you should see this
(NOTE: some versions should see "Pres MENU to format, pres other key to use USB disk, or , not format"
in any case you should format!
Be prepare to lose everything in the player.
OK, if you failed,repeat all procedures, we need this (see image), calm down and everything will be OK, this MP4 player is very related to a computer itself, for that reason its
very secure upgrade firmware.
OK Windows will detect it, but one unit will have 16 Mb of storage space, well, copy the following files of the firmware:
AKresData.bin (controllers)
Magic.bin (O.S. itself)
other files are optional.
then Release the player in secure form, restart it, and if youīre lucky, your player will be alive again!
ENJOY!
/// ************************************************** *///
Its
Experimental but if works please let me know
first you will need
* Fimwares for try compatibles whit this model
One
Two
Three (hight experimental)
* Battery charged its not needed
for this model connect the USB cable and press UP, then jump to the step 5.
* USB cable
* Be very prepared for all.
Please use the reference images.
figure 1
figure 2
figure 3
Ok try this
(Use the Images to reference)
1 Press UP and POWER ... wait a little.
2 Release UP, and POWER
3 Press DOWN (The screen maybe blink, be careful but donīt worry if the player restart, repeat the step 1)
4 Connect the USB Cable
5 press UP and the player will be Formatted automatically in FAT32.
6 Copy the new firmware. (try with all the firmwares.)
7 press RESET
8 Turn on and
Hold the POWER button
for 3 Seconds
if works please let me know.
thanks for reading
FINAL NOTE:If you have a working player, please upload your fimware, we need it, for more compatibility
for extract the firmware, repeat the steps but DONīT FORMAT or your player will die, then if you do it well, copy the files mentioned and upload it!.
Re: MP4 Players ANYKA chip **** UPDATED ****
