Re: MP4 Players ANYKA chip **RE-UPDATED **
 

I have the same mp3, as you working, tell me how to extract firmware and i post it here for everyone.

my player is like this
http://www.mympxplayer.org/pafiledb/...player_321.jpg

my problem, it stuck in bluescreen with bios 3221-MLC-SPI-9320-5408-H
how can i pas this?
please help..

if you open your device you see in hardware it is sunplus device if you want help for sunplus device I think they will help you

here

br

http://www.marvelgsm.com/vbb/forumdisplay.php?f=94

In a nutshell:

My player looks like:

[IMG]file:///C:/DOCUME%7E1/Deckard/CONFIG%7E1/Temp/moz-screenshot.jpg[/IMG][IMG]file:///C:/DOCUME%7E1/Deckard/CONFIG%7E1/Temp/moz-screenshot-1.jpg[/IMG]http://img.auctiva.com/imgdata/9/3/8...14550251_o.jpgCHIP ANYKA3631LQ 14402 (FS05D9)
Other chips SAMSUNG901 and ELPIDA181WAN; Screen SX-TGS280LGPVT00-0

Detected it as M3CHIP, installed drivers, used burn tool (anyka tool 2.0.7a) to upload firmware and player went into black screen forever. After several errors trying to use the tool again, managed to make it work with anyka tool 2.1.1D, change firmware again, nothing happends.
I enter the recovery mode by presing the small reset button (player off...) and inseting USB cable; I don't get any "blue screen BIOS mode", dunno if I should... I also dont have new drives, so cannot "see" the playeron my computer. Anyka tool is the only one that detects the player and is able to do something, no other tool worked so far.

Please, tell me what to do/method to use

Thanks!!

I think you can extract the firmware of the device as:
 

Hi, Did you extract your firmware ? I have the same player and I delete my firmware. I know how extract, if you don't I can tell you.
Thanks.

How to extract the firmware (Windows), #### I can not guarantee that the firmware can not be erased because the buttons are not clearly identified ####:

Before starting backup all files that are recorded on the player. :confused:The buttons are not clearly identified:confused:, :(you may lose your player like me.:(

1. Disconect your player from USB, if conected;
2. Turn it off;
3. Press the camera button and hold;
4. Press the on/off button and release both buttons;
After that the player will show this message: "insert usb line to use usbdisk"
5. Please, read all lines below, to prevent from erasing your firmware;
6. Connect to the computer;
After that the player will show this message:
NOW BIOS VERSION: k... MSLC_VO.3.9
Press Ok key to format
Press other key to not format
7. DON'T touch the on/off button (I did this and lost the firmware) ;
8. Press and hold the camera button;
After that the player will show this message: usb disk
9. Configure the USB disks (Windows), will appear three discs, the first and second have the firmware;
10. Copy all the files in separate folders for each disk.

These files are the firmware. If you can extract the firmware could you send me? :D

Thanks

I need a firmware for this player
 

Did you have the firmware? I need a firmware for the same player !!! Please, HELP!!!

hello every one=)

well, after 3h doing "google research" and reading this forum, specially this post, I've got an idea of what to do, the only problem is that my MP5 hast an AK3631lq4402 chip from ANYKA, this one is mentioned here, but no one has uploaded a FIRMWARE for this chip..
any way i've managed to get one or two out there, the only thing is that i can't get to the bios mode, not even manage to see any drives in "My PC"
the player is like this:
http://i78.photobucket.com/albums/j1...nie021/ex2.jpg
http://i78.photobucket.com/albums/j1...nie021/ex1.jpg

well I really hope this thread continues, it helped my too much this far...

regards from Buenos Aires Argentina ;)

thanks..
(sorry for my bad english...)

solved
 

:):):)TELEBIT 622 (2GB)
ANYKA AK3631LQ4402
SAMSUNG 916K9GAG08U0M
J WIN TN8M16SD-7
TV1F036-V1.5/TV1F036-V1.1
CAMERA 1.3MP

my mp5 alive again....................

fw TVIF036-V3.0
 

firmware : 4shared.com - online file sharing and storage - download TVIF036-V3.0.rar