IPOD Nano copy 8GB, firmware Chip Hynix HY27UF081G2A

[zerio]

Hi LIST,

MY war agaisnt a SELLER scammer at DHGATE.com called cjh18shoes WAS IN VAIN..only partial refund was all I could get..

But the worst of all was to have the item dead . At first, I had problems to transfer files... then , I tried to transfer a full file near 6GB and the ipod crashed.Bit before I had formatted and I found a bizarre information..the PC viewed my ipod copy as TWO mass storages devices as partitions ..one with 8GB and the other one with only 2 MB ...no mistake .it was TWO MEGA indeed.

The result was a blue screen with the sand clock ......after inumerous attemptings to try to get the correct firmware on the web my ipod nano copy now does not even light the display..its dead..black...no firmware is compatible.. The only good thing is that the ipod is recognized AS ADFU ie its in recovery mode..but what diffierence woudl it make? It doesnt make things easier . Please help me , I need the right firmware for the Chip Hynix HY27UF081G2A, TPCB 713( I cannot read anything elsebecause theres aglue on the topof the chip..besides that the installation CD had a torjan..UNBELIEVABLE)

I use the mp3s to work...So i Urge to have it fixed asap .PLEASE

I cannot find any help in my country ,BRAZIL or any where else. ALlI hear is to throw it away...but ihad costme150USD plus ( imporitng fees and VAT included and its alotofmoney for me. I hope to have some Light of Inspiration, Tip from the moderators and the big ones here and finally get the firmware that willl make my chinipod nano back to live again...

Thanks very much and please..be aware of that scammer ..its not only EBAY that has bad sellers...in particular if you are a distant buyer ,they dont replace and at maximum you can get is a partial refund.Still the website and seller make money on you, :evil:

Well this is my ipod situation and Im hoping that someone out there may help me as quickly as possible. Thanks in advance.

[lattesurf]

zerio , very sorry to hear about this. But the worst news is that the Hynix HY27UF081G2A is only a 1Gigabit (128MegaByte) memory chip.

Locate the other square black chip, 2nd largest in size, the serial number should be something like ATJ2085, ATJ2097, etc. You'll need this locate a possible group of firmwares.

[zerio]

Hi Lattesurf

Thanks for yourposting.

I could tell right away there was something wrong and then I found it was only 1GB .the seller is a thief indeed. Worstofallthey change names , have false statments...best of allis tocontact the smallmanufacturers that sell sample items..youpay a bit more than forabulkorderbut its much trustworrth or youbuy from reliable realplaces...

So, I have to find a way to remove the glue on the topofthis 2nd chip totry toread the ATTwatever...Ill try to do that... hope some one can send me the firmware as soon as I getit.

Thanks indeed.Take care.

ZERIO

[zerio]

HI Lattesurf, Hi List !

The information youneed is: ATJ2091N and then theres another . ( I dont think this oneis relevant,is it?) FB181DB196

Anyway, the ipodis recognized in ADFU mode , does it make unnecessary to provoke the short cut on the chip whileitem isUSB plugged? Im asking it because there s no way to unplug the tiny battery and I would have no way to put the battery backon if I cut the tiny wires. Thus,I hopenow with this information someone can really help me now.

Thanks a lot, in advance.

[lattesurf]

zerio , you'll be needing the v9.0.xx series firmwares here http://www.mympxplayer.org/actions-9...ware-dc37.html

Install MP3 Utilities and start the Upgrade Tool, there are many versions in the downloads section. See if the software detects your player.

If it does, then you'll need to try all the firmwares for your screen size until you get a working one.

[zerio]

Originally Posted by lattesurf";p=&quot

zerio , you'll be needing the v9.0.xx series firmwares here http://www.mympxplayer.org/actions-9...ware-dc37.html

Install MP3 Utilities and start the Upgrade Tool,.

Ivedownloaded the 3.68version..
Hi do you really mean upgrade tool or UPDATE tool? When I try to use upgrade tool Im asked to install a CD!
Now am trying the 4,15 version...Ive already checked all those firmwares but I had used the program Media Utilities 1.45 and started the Mp3 update tool... so.,..shouldit be UPGRADETOOL??? Then I shall use another version...

Looking forward to hearing more tips.Thanks in advance.

ZERIO

[zerio]

Hi Lattersurf and List

I used the Upgrade Toool fromMedia Uitlities 415...I could get the display to light again... formattedusing the media utilities and I gotONLY 103Mb of memory.. But the ipodis notfunctional..its just like a pen-drive of mere 103Mb.

Ive tried all the FW..I ll carry on retesting one by one...please share with me any futher tips.Id really apporeciate ir. TX

[zerio]

Hi again


Things got out of control trying the FWs suggested..now the Ipod has the display on..ONLY WHITE..;;;but no function and the PC does not recognize the ipod...not even is seen as ADFU....ie its dead indeed and I am dead LOST..:-(((

HELPPPPPPPPPPPPP ME PLEASE!!!

[lattesurf]

zerio , the last firmware that you tried to flash into the player probably totally disabled the whole player. Which in this case, you'll need to perform the Dead Player Recovery Guide here http://www.mympxplayer.org/dead-play...ide-vt567.html

This would reinstall the player as ADFU, which would allow you to continue trying other firmwares again.

[lolita]

What is the screen resolution?

Actions supplies a solution with ATJ2091x and 128x32 mono LCD.