Re: Change AdfuUpdate.inf
 

Well, thanks Jim! I've tried all the 6 possibilities, including two of them together... but no results. :(

Actually, the device didn't turned on when the pins were shortened! I've isolated the other pins to protect the chip so I could work better, take a look:
http://img206.imageshack.us/img206/7716/mira02uz5.jpg

But I think I'm gonna try again another time... with a little help from a friend... another question:
The device was working fine before I've made the procedure described here by sableroku but I could connect it to WindowsXP, so I decided to try that upgrade. But when I got that blue "usb drive" screen I still could connect it (0000 device id) to XP. So, is there a way to avoid that blue screen when I turn it on? The reset button seems to do just nothing!!!

Re: Change AdfuUpdate.inf
 

ID is

USB \ VID_10D6 & PID_FF66 \ 5 & 154C0453 & 0 & 3


How Adaiqa

Re: Change AdfuUpdate.inf
 

I did follow all instructions and worked good until I got error from window stating that the USB 2.0 (FS) ADFU Device did not pass window logo testing and will not be installed...I am logging in as admin and still keep rejecting the installation how can I get around this/
Thank you and god bless
Norman