display freeze on hourglass !

[paikan]

Hi, I'm new on this forum and Your topics are very great and usefull !
Unfortunately, I haven't found an anwser to my problem. I bought a 8Go player on eBay and it work 2 months ! Now, each time I try to charge the battery, or I switch on to try and use my mp4, the screen only show a hourglass. The display freeze on this picture and I can't do anything ! I thought to format it but my computer doesn't see it as an USB devise. I can't use any tools software utilities since no divice is found !!!!
What can I do ? Is it dead ???
Many thks for your comments and help (I hope so !).

Thks
Regards

[_Jim_]

Hi,

1) sorry, but your memory is hacked. There is no 8GB player...

2) There is already a topic on hourglass by vtr

http://www.mympxplayer.org/mp4-shows...ss-vt7512.html

You need to get a new firmware, so you will get rid of your hourglass and even the memory hack will be gone. Normaly you will have 2GB real memory :?

So download the adfuUpdate file in the download section and get your player into an ADFU Device.
You will find all the needed information in the forum.

Good Luck
Jim

[paikan]

Hi Jim,
Many thks for your kind reply. I'm going to read carefully the topic concerned by and will come toward you again later... Anyway, you gave me little bit hopes to save my player. !!!
See you later
Bye
Bob

[paikan]

Hi Jim, I'm coming toward you because I tried to follow you instructions but I failled !!! :cry:
But I think you speak french ! Can I explain you my problem in french or do you prefer in english ?
Please let me know in order to I can tell you.
Waiting for your comments
Ths
Regards
Païkan

[paikan]

Hello again Jim,
without comments from you because my question was asked only few hours ago !), I'm going to try to explain my problem. In fact I have 2 same mp4 player (8Go) bought from the same seller on eBay. One keep on working (with sometime some bugs !) and the other one got the "hourglass freeze" problem. I read carefully your topic you gave me about this "display freeze on hourglass " but I'm afraid I didn't really understood. 1st, I don't understand what is exactly the adfuUpdate.inf file !!! I found such a file in my Win XP directory and I tryed to use it as explain in the topic ! But I can't :evil:
When I connect my fective player to usb port, driver is required to unstall a "USB device". after that, 2 cases :
1st case, I choice the way to "unstall the device from a list". I select "look for the best driver into this path" and I give the directory where I put a copy of the adfuUpdate file (outside from Win XP directory). When I confirm, my computer works and after few seconds, a message says the device wasn't unstall because no software was found to unstall it !!!! :?: :?: :?:

2nd case : I choice the way to "unstall the device from a list". I select "I'm going to choice the driver to be unstall" and after that I have a list of devices but not USB device !!! I tryed few ones but all gave the same result. I mean if I choice "choice all the devices" then "continue" , then "standard system device" (for manufacturer) and "disk supplied", then I specify the directory where I put a copy of the adfuUpdate file (outside from Win XP directory), then the message is alway the same : "The directory specified hasn't got any information about your device" :cry: :cry: :cry:
What can I do ????
Please help me if you can :lol:
May be I can use something from my other same mp4 player (before it becomes dead also !!!), but what ???
Many thks in advance for your appreciated comments.
Regards
Païkan

[_Jim_]

Hi;

Plug-in your Player and don't install any driver.
Go to "panneau de configuration" (I guess your Windows is in French) ops:
-> "Système"
-> "Matériel"
-> "Gestionnaire de périphériques"
now, look if you can find your player there. It can be an "Périphérique inconnu" or "USB device" for example.
anyway, make a right klick and choose "propriétés"
-> "détail"
Now, there, you will be able to read the device information which you have to write down.

There you will find the identification you need. It will look like this :

USB\VID_10D6&PID_6982\6&31B7E506&0&2

The VID and PID number is what we need to edit into AdfuUpdate.inf, in order that Windows knows that this file has hardware information for the selected device.

Example:
If your VID is 10D6 and your PID ff51, you have to change adfu file into this :

[Upgrade]
%USB\VID_10D6&PID_ff51.DeviceDesc%=MDisk.install,USB\VID_10D6&PID_ff51

and this last line :

[Strings]
MSFT="MP3 Player"
MfgName="MP3 Player"
USB\VID_10D6&PID_ff51.DeviceDesc="ADFU USB Device"

The adfuUpdate.inf is located in your windows folder. If you have problems doing this, post me your information which you have found in "details".


After you have changed your adfuUpdate.inf in your windows folder as described, unplug your player und plug him into another usb port in order that windows asks for drivers.

From here on, you have to follow this :

-> "Installer à partir d'une liste ou d'un emplacement spécifié (utilisateurs expérimentés 8) )"
-> "Ne pas rechercher, je vais choisir lepilote à installer"
-> "Disque fourni"

Here, you get to your modified adfuUpdate.inf file located in your windows folder.

And now you should have an "ADFU Device" 8)

From now on, you finally will be able to load a new firmware with the latest update utility tool which you can find here in our download section.

Good luck

Best regards
Jim

[paikan]

Hi Jim, thks for your details.
The information I found in the "panneau de configuration" concerning my player are : USB\VID_10D6&PID_FF66\6&317479E3&0&1
So I understand my VID number is 10D6 and my PID number is FF66 (without any other carracters as \6&317479E3&0&1, correct ?)

My adfuUpdate file is as follow :
[Version]
Signature="$CHICAGO$"
Class=USB
;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}
provider=%MSFT%
DriverVer=08/18/2005,3.0.0.0
LayoutFile=layout.inf

[Manufacturer]
%MfgName%=Upgrade

[Upgrade]
%USB\VID_10D6&PID_8888.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_8888
%USB\VID_10D6&PID_ff51.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff51
%USB\VID_10D6&PID_ff61.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff61

;[PreCopySection]
;HKR,,NoSetupUI,,1

[DestinationDirs]
umss.files = 10,System32\Drivers

[MDisk.install]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT.Services]
Addservice = AdfuUd, 0x00000002, AdfuUd_AddService

[AdfuUd_AddService]
DisplayName = %USB\VID_10D6&PID_1160.DeviceDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\AdfuUd.sys
LoadOrderGroup = Base

[umss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,AdfuUd.SYS

[umss.files]
AdfuUd.sys

[SourceDisksNames]
1000 = "USB Mass Storage Device",,,

[SourceDisksFiles]
AdfuUd.SYS = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="MP3 Player"
MfgName="MP3 Player"
USB\VID_10D6&PID_8888.DeviceDesc="USB ADFU Device"
USB\VID_10D6&PID_ff51.DeviceDesc="USB 2.0 (FS) ADFU Device"
USB\VID_10D6&PID_ff61.DeviceDesc="USB 2.0 (HS) ADFU Device"
Do I have to add one additional line with my VID and PID numbers (and keep the other values shown) ?
Or erase all the previous line with the previous values in order to keep only the values for the mp4 player I'm working on ?

and finally, which firmware I have to download from the download section ? At worse, can I get the one from the other and same mp4 player I have that keeps on working under 8Go ??? !!! In such a case, How can I do ?
Thank you very much
Best regards
Païkan

[_Jim_]

Helloa;

make a security copy of your adfuUpdate.inf file
delete all in your adfuUpdate.inf file and copy this into it :

[hr:e9b5070a94]

[Version]
Signature="$CHICAGO$"
Class=USB
;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}
provider=%MSFT%
DriverVer=08/18/2005,3.0.0.0
LayoutFile=layout.inf

[Manufacturer]
%MfgName%=Upgrade

[Upgrade]
%USB\VID_10D6&PID_ff66.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff66

;[PreCopySection]
;HKR,,NoSetupUI,,1

[DestinationDirs]
umss.files = 10,System32\Drivers

[MDisk.install]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT.Services]
Addservice = AdfuUd, 0x00000002, AdfuUd_AddService

[AdfuUd_AddService]
DisplayName = %USB\VID_10D6&PID_ff66.DeviceDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\AdfuUd.sys
LoadOrderGroup = Base

[umss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,AdfuUd.SYS

[umss.files]
AdfuUd.sys

[SourceDisksNames]
1000 = "USB Mass Storage Device",,,

[SourceDisksFiles]
AdfuUd.SYS = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="MP3 Player"
MfgName="MP3 Player"
USB\VID_10D6&PID_ff66.DeviceDesc="USB 2.0 ADFU Device"

[hr:e9b5070a94]

Voilà, now plug in your player, and do the installation procedure as I mentioned in my last post with this new AdfuUpdate.inf file

Now you will get an "ADFU Device" and you can user the "mp3 Player Utilities 4.05" (The "Upgrade Tool") and upgrade this firmware :

http://www.uxcell.com/tech-support-d...39_glacier.zip

Begin with version 3, this should work. after upgrading, unplug your player, insert the battery and then turn him on. the hourglass will show up and you have to wait for 1 or 2 minutes !! until the player boots with the new firmware for the first time !

Yeah your player works again, you now have to format him in windows and you will see your real amount of memory !! I guess, 2GB

Best wishes
Jim

[paikan]

Hello Jim,,
Well I followed strictly your instruction but unfortunately, ... It failled :cry: :cry: :cry: !
Now the display stay totally black !!!! But yhe player is seen under window XP with 1Go for total and free memory !!! I made a low format following this topic :
http://www.mympxplayer.org/how-to-re...ck-vt2400.html

At now, I only used the version #3 for firmware upgrade.
Still waiting for your help, if you can and want :wink:
Many thks in advance, hoping we'll success soon

Regards
Païkan

[paikan]

Sorry Jim,
I forgot to tell you I didn't touch the battery (remove or insert). It stay inside the mp4 player during all the process.
thks
Rgds
Païkan