Hello makd511 the player does not have the firmware damaged lights and sounds, the problem and has the calibration of touch screen calibrated evil and therefore I can not access the greater part of icons, practically when I hit the 3rd icon (Photo) I activates the command of the first icon (Music) so on down vertically with icons, practically has moved all of two icons to the right ... I can not longer use the commands (Text) (Record) (Settings) (Video) and other .... but only the first three of the first column.
The rest work, is not damaged ...
And the recovery procedure for the player died not because I need the PC sees comes in Recovery Mode, but I do not have a firmware from sending them to restore.

Now I was doing some experiment, I found a program for chips (Flash Empty Tools) that can read the Flash Player ...
I extract the firmware even if I do not know whether it is properly extracted because the program asks me start and end extraction, and I do not know how the Flash is its ability or size or what is the size of the firmware ...
I have extracted 17.3 MB firmware around, but I do not know if they extract all or no or I went beyond its capacity, because the program has no limit.
How do I check the firmware extract is correct?
Thank you expect some answers.
A cordial greeting to all.

Re: Help me for MP4 touch screen 2.8 rockchip
 

Under Settings, -> System -> Calibrate

you can recalibrate the touch of the screen setting. This should reset the options for calibration of the touch and have your icons/touch reset

Have you tried that yet :?:

I can not go into settings because when I hit them from file browser ... I do not know how to go in the calibration menu ... One way and reset the settings in some way, which is not the reset button