[solved] Touch screen calibration never end
 

16GB MP3 MP4 MP5 RMVB AVI Player/3.0" Touch/8GB TF Slot

I have bought an MP5 player online but the original seller disappeared from ebay. Now, the touchscreen is not working. I tried the screen calibration tool but never see the OK button. I have 16GB:

Product Name: RK27SDK
Major Version ID: 1.2
Hardware ID: 080422

I found the firmware online at http://www.mympxplayer.org/rockchip-...-pm-df933.html

How do I bypass screen calibration and get MP5 started?

Amy

have you tried the reset button and are you sure you are hitting the calibration points exactly right or it will keep asking to do it, what about connecting to the pc, does the player connect alright and when you disconnect from the PC using SAFE DISCONNECT what screen does the player go to

I tried reset button many times already. I tried to hit the calibration points as accurate as possible. MP5 connects to PC ok and I did use Safe Disconnect when done. How rounds does calibration usually take to complete?

what happens on the player after safe disconnect, dose the player go direst to calibration screen or battery charge screen

The player go directly to calibration screen after safely disconnected.

Does anybody have firmware that has screen calibrated and works fine?

there are firmwares for this sryle player buy no definayete that they will work for your particular version as they are often different

Could you tell me more: where can I find those firmwares? Thanks.

hi amyjohnson

Have you made a backup of the firmware on your player now?

If you are thinking of trying another firmware, do make a backup first just to be on the safe side.

look in the downloads section under rockchip firmwares you will see firmwares and images withthem to match against

with yours being 16gb though i have doubts that they will work

do you know how to access the hidden partition to back up the firmware

For calibration always use a stylus because the screen isn't made for fingers