Looking For QY-117V1-k 2007.10.15 control: HSD 0748

Sickness.inside · #1 (**permalink**) 1st Feb 2009, 5:16 am

Hey everyone,
I have an MP4 nano-like chinese, The upgrade tool detects the following:
Device name : S1 MP3 Player
Productor : Wilson Co Ltd
Version : 9.1.52
I found this witten inside the MP4 :
The screen number is QY-117FV1-M 2007.10.15
The plate number is QY-117V1-k 2007.10.15
The control i think is HSD 0748 Not sure though
Now I was wondering what f/w Can I use

Groovy · #2 (**permalink**) 1st Feb 2009, 6:50 am

Hello if your player is working well, dont upgrade it with any firware....

BEfore you upgrade (if needed) extract fw from your player using s1fwx tool

I am not sure but maybe this fw would be similar

http://s1fw.com/Actions-AK102X/AK102...1221-IPOD.html

Sickness.inside · #3 (**permalink**) 1st Feb 2009, 7:34 am

It's not working well, The only thing I get is a blue screen. Oh and the cntrol is AK1025, and the fw you gave me didn't work, version mismatch

Groovy · #4 (**permalink**) 1st Feb 2009, 8:12 am

MAn i suppose it has to work... what ecactly the upgrade tool says ?

Sickness.inside · #5 (**permalink**) 1st Feb 2009, 8:43 am

I think it has to work too but ..

Attached is a screenshot of what I see from MP3 Player Utilities.

I'm using the latest version of MP3 player utilities (4.05)
I have the same problem as this guys apparently:
http://mympxplayer.org/need-firmware...m-vp51713.html

lolita · #6 (**permalink**) 1st Feb 2009, 8:55 pm

Use different version of player utility.

Groovy · #7 (**permalink**) 3rd Feb 2009, 4:17 am

HEy this is always caused by uknown signs in name of file... The chinese stuff... U can rename it and it will work... Or use product tool 4.19

Good luck

Sickness.inside · #8 (**permalink**) 3rd Feb 2009, 4:18 am

I tired both 3.68 and 4.06 and they both give the same error. =/

Groovy · #9 (**permalink**) 3rd Feb 2009, 4:19 am

OH and ! In your picture you are uploading 3.0.08 on 9.1.52 ??? Why ??

If nothing work, short the chips again to get it to RECOVERY MODE (ADFU device) then it has to accept any fw !

Sickness.inside · #10 (**permalink**) 3rd Feb 2009, 4:39 am

Well in the picture the fw I'm trying to put is the one you gave me, which is supposed to be 9.1.52, so I suppose the upgrade tool is fault. But again, I can't find any "Product tool 4.19" on the net, the ones i DLed were archive damaged. Oh and even in ADFU mode, my MP4 didn't want to accept any fw.