[solved] No noise. Headphone hole doesn't work.

[jumpyroo92]

The Headphone hole thingy, when you plug in headphones there's no sound. (there used to be, then after awhile you had to turn the plug a certain way to get sound and now there's no sound at all)
I think I need to bend some metal things closer to the hole?
I'm not sure if I should take apart my player. I started to do it but was afraid I was going to break it.
Is there somebody that could tell me how to?

Player: TFT MP4 Player 8G (the ipod touch clone that says Mini MP4 Player at start)

[jumpyroo92]

Since nobody replied to my question for a long time, I decided to take the risk and fiddle with my Mp3.

I fixed the earphone thing:
(this is for the ipod touch clone- Mini Mp3 Player)

1. Undo the two screws at bottom. Take back off

2. Undo the four screws in the corners.

3. From bottom, push screen towards yourself. It should pop out.

4. careful unattaching the USB and on/off switch. There's a wire attached to the front cover so be careful with that.

5. on outside of earphone hole there are three metal plates. Push them in a little more. Test sound by plugging in earphones then.

6. When all's adjusted put everything back together.

TIP: To ensure that you aren't breaking your Mp3 while taking it apart, have it playing music while you do it (If you have speakers). If it stops suddenly, then you know there's a problem.

TIP: don't take your Mp3 apart too many times. I've noticed that my screws have become looser and looser because of excessive screwing. These Mp3 don't use top-notch material.

[admin]

Hi jumpyroo92,

Thank you for posting your solution on this site.

Sometimes the forum gets too many posts and we can't cover them all straight away (remember this site is provided free and people spend their free time to help in this forum so we only do it in our spare time).

Do you have any pictures you can send with it?

Once, again you taking the time to post a solution.